Introduction

18

English Listening to CDs/MDs
Press the number buttons ( -
or ) to select the track you want to
listen to.
• Refer to "Using the number buttons" ( page
10).
You can play back just the tracks from a group
which you want to listen to.
While the MD is stopped
1Press repeatedly to select
"GROUP".
2Press .
• Group 1 playback starts.
• If there is no group, "GROUP" disappears
and normal playback starts.
3Press or to select a
group.
• When playback of all tracks in the selected
group finishes, playback automatically
stops.
While playback is stopped, press
repeatedly to select an item other than
"GROUP".
NOTE
Ejecting the MD or turning off the main unit also
cancels group playback.
This function allows you to repeatedly listen to the
same track.
During CD/MD playback, press
repeatedly to select the repeat mode.
Each time you press , the display toggles as
follows.
Example: While "REPEAT ALL" is selected
NOTE
Ejecting the CD or MD, or turning off the main unit
also cancels repeat playback.
This function allows you program up to 32 tracks.

1

CD: Press , and then press .
MD: Press , and then press .
2Press to select "PROGRAM".
Example: While CD program playback is
selected
(Continued on the next page)

Specifying the Track (Direct

Track Selection)

Group Playback of an MD

Group indicator

Canceling group playback

Repeat Playback

Program Playback

Repeat indicator
: For repeating all tracks in a CD/
MD. For repeating all tracks in
the selected group when MD
group playback is selected.
: For repeating one track.
: For canceling repeat playback.
Program indicator
UX-Q1[UB].book 18 ページ 2004年7月21日 水曜日 午後1時44分