31

Editing Tracks

Example: Dividing a tune into tune A and tune B
■While the track you want to divide is being
played back
1Press repeatedly to select
"DIVIDE?".
2Press .
• You can also select the track number with
, or the number buttons. Refer to
"Using the number buttons" ( page 10).
3Press to specify the dividing
point.
• This product repeatedly plays back the 4
seconds of sound immediately following the
dividing point.
• When the dividing point does not have to be
adjusted, proceed to step 5.
• When you want to adjust the dividing point,
proceed to step 4.
4Press or .
• You can adjust the dividing point within the
range -128 to +128 position (approximately
-8 to +8 seconds in SP mode).
5Press .
6Press .
NOTE
• During editing, you can return to the previous step
by pressing . You can quit the editing operation
by pressing .
• You cannot divide a track in an MD containing
254 or more tracks. When you press in step
3, "DISC FULL" appears.
• When you divide a track that has a title, the title is
added to both divided tracks.

Dividing a Track into Two

Tracks (DIVIDE)

Track
number
"POSIT." stands for "POSITION".
UX-Q1[UB].book 31 ページ ２００４年７月２１日　水曜日　午後１時４４分