JVC UX-Q1S, LVT1218-002A, CA-UXQ1W, CA-UXQ1S, SP-UXQ1W, UX-Q1W Entering Titles, Available Characters

NOTE

•Number of characters that can be entered to an MD You can enter up to 1,792 characters to each MD, with up to 61 characters to each track. However, the actual number of characters that you can enter is less than the number indicated here because of restrictions of the MD writing method.

Spaces are counted as characters.

When you use long-play stereo recording (LP2 or LP4), the larger the number of tracks is, the smaller the number of characters that you can enter, because "LP: " and 4 spaces are automati- cally added to each track.

You can set this product so that "LP: " is not

added to tracks. ( page 25)

Example: When editing 120 tracks recorded using long-play stereo recording to an MD, you can enter 10 characters to each track.

•You cannot edit a title consisting of 62 or more characters. When you want to edit a title contain- ing 62 or more characters, edit the title on the equipment on which the title was entered.

•You can set a title during recording.

•While recording from a CD (except when recording only one track from a CD), you can enter up to 16 track titles before recording finishes.

•If you do not press before recording fin- ishes, the entered titles are not stored.

•During group recording, you can enter titles for the group.

Entering Titles

Example: To enter "F"

1)Press repeatedly until [ ] appears on "A".

2)Press repeatedly to display "F".

Character entry position (flashing)

Available character types:

[ ] indicates the selected character type. [A]:Uppercase characters or symbols [a]:Lowercase characters or symbols [1]:Numerical characters

•Several characters are assigned to one button. Press the button repeatedly until the desired character is displayed.

•For the available characters, refer to "Available Characters" shown on the right.

To move the character entry position				English
• Press	or	.
• When you want to enter "NO", "TV" or two char-
acters which are assigned to one button, enter
the first character, press			to move the char-	MDs
acter entry position to the right, and then enter				Editing
the second character.

To erase a character

• Move the character entry position to the charac-

ter you want to erase, and press .

To enter a space

• Select the space from "Symbol" ( the chart below). You can also enter a space at the end of

a title by pressing .

To quit title entry

• Press or . The entered titles are not stored.

Available Characters

Button	Uppercase	Lowercase	Numerical
	character	character	character
	Symbol*	Symbol*	1
	ABC	abc	2
	DEF	def	3
	GHI	ghi	4
	JKL	jkl	5
	MNO	mno	6
	PQRS	pqrs	7
	TUV	tuv	8
	WXYZ	wxyz	9
			0

*Available symbols

Space

30