JVC CA-UXQ1S Recording Sound to Cassette Tapes, Preventing recorded sound from being erased, Ing

Recording Sound to Cassette Tapes

Main unit

Remote control

NOTE

•The sound input level during recording is automati- cally adjusted.

•When you record tracks from a CD or MD, a 4- second blank is inserted between tracks in the recording. You can record tracks with no blank

time. ( page 28)

CAUTION

•It may be unlawful to record or playback copyright material without the consent of the copyright owner.

•Do not use long cassette tapes such as C-120 or C-150. Long cassette tapes are thin and stretch easily, and may become tangled in the inner part of the main unit.

•Since this product is not compatible with TYPE II and TYPE IV cassette tapes, do not use these types of cassette tapes. This product does not meet the specifications for these tapes, so sound is not properly recorded to these types of cas- sette tapes. You cannot obtain proper playback sound.

Preventing recorded sound from being erased

•Write protect tags are attached to a cassette tape for preventing the erasing of recorded sound. They enable you to avoid losing impor- tant recordings because once you snap off the write protect tags, you cannot record to the cas- sette tape or erase recorded material.

•When you want to use the cassette tape for recording again, cover the tag holes with adhe- sive tape.

	Write protect	Write protect
1	tag for side B	tag for side A
	Insert a cassette tape for record-

ing.

•Before inserting the cassette tape, wind the tape past the leader part of the cassette tape.

Magnetic tape

(recordable part) Leader tape (unrecordable part)

2 Press to select the reverse mode.

•Each time you press , the display toggles as follows.

: For one-way recording on either side.

: For one return recording on both sides.

: Pressing automatically starts one return recording on both sides.

3 Select a sound source for recording.

Sound source			Operation
CD	Press	, and then press				.
	(The CD is stopped.)
MD	Press	, and then press			.
	(The MD is stopped.)
Radio broad-	Select the radio station whose broad-
cast	cast you want to record (			page 14).
Sound from	Press		repeatedly to select AUX,
other equip-	and prepare playback on the other
ment (AUX)	equipment (		page 22).

4 Press on the main unit.

27