JVC LVT1218-002A Using the Timers, Sleep Timer, Recording Timer, Changing the sleep timer setting

Using the Timers

Set the clock beforehand. ( page 10)

Sleep Timer

When the specified time passes, the main unit automatically turns off.

Press .

•Each time you press , the time display (in minutes) toggles as follows.

Cancel (Sleep indicator disappears.)

Example: To set the sleep timer to 60 minutes

Sleep indicator

NOTE

•When you set the sleep timer, the display window automatically dims.

•Before the clock has been set (While "0:00" is

flashing), when you press , "CLOCK ADJUST!" appears.

Recording Timer

You can use the recording timer function to record FM/AM broadcasts or sound from other equipment to an MD or cassette tape.

You can enter up to three timer settings in total for the recording timer and the playback timer

( page 41).

NOTE

• Timer settings remain unchanged until the timer is replaced by new setting.

1 Prepare to record.

Radio	Preset the radio station whose
	broadcast you want to record. (
	page 15)
Other	Follow the operation manual for the
equipment	equipment.
MD recording	Insert an MD. (	page 17)
Cassette	Insert a cassette tape. (		page 21)
tape
recording

2 Press repeatedly to select "TIMER1", "TIMER2" or "TIMER3".

Example: When "TIMER1" is selected

		Timer number
3	Press	.
4	Set the starting time and ending
	time.

Example:To set the recording time from 6:30 a.m. to 6:45 a.m.

Changing the sleep timer setting

• Press repeatedly to select the time again.

Confirming the sleep timer setting (remaining time)

• With the sleep timer activated, press once.

•For setting the clock, refer to "Setting the

Clock" ( page 10).

Entering the hour → → Entering the minute →

39