JVC CA-UXQ3S Basic Operations, Setting the Clock, Adjusting the clock, Press, About this manual

Basic Operations

About this manual

•This manual explains the operations assuming that you will use the remote con- trol. Some buttons on the main unit are the same as those on the remote control. You can use either button in this case.

•Some diagrams in this manual are simpli- fied or exaggerated for the purpose of explanation.

•You can operate some functions differently from the explanation given in this manual.

Number buttons

•You can use the number buttons to specify the hour.

Refer to "Using the number buttons" shown below.

3 Press .

• To return to step 2, press .

4 Set the minute in the same manner as steps 2 and 3.

Adjusting the clock

Press four times to display the clock, and then adjust the clock starting from step 2.

Displaying the clock while using the main unit

Press repeatedly.

NOTE

•The time display on the main unit is a 24-hour clock.

•The clock will gain or lose approximately 1 minute per month.

•Set the clock again after you have disconnected the power plug or a power cut has occurred.

Basic Operations

Setting the Clock

You can set the clock while the main unit is turned either on or off.

Example: To set the clock to 10:10 a.m.

1 Press .

2 Set the hour.

Back Next

•Holding down the button causes the hour to increment.

Using the number buttons Examples: 3:

13: →

20: →

23: → →

123: → → →

• is used when you select an MP3 track.

10