(Continued) Basic Operations
3 Press to adjust the intensity of the component color.
•You can adjust the color intensity within the range "0" to "3".
You cannot set all three component colors (red, green, and blue) to "0" at the same time.
Auto Standby
If no sound is produced for 3 or more minutes when the CD or cassette tape is selected as a sound source, the main unit automatically turns off.
■When the CD or cassette tape is selected as a sound source
Press .
NOTE
•You can also adjust the color intensity by turning the VOLUME control on the main unit.
•After you have adjusted each component color, the display returns to the sound source display in approximately 8 seconds.
•You cannot set different colors for the display window and CD tray.
•When you operate a button on the main unit or remote control, the display window and CD tray light in pale blue for approximately 2 seconds.
•When recording finishes, the color of the display window and CD tray switches to the color set in "MANUAL" to inform you that recording has finished.
When you operate the main unit after recording finishes, the color pattern for the display window and CD tray returns to the selected pattern.
Changing the brightness of the display window and CD tray (DIMMER)
Press | . |
| ||
| • Each time you press | , the display tog- | ||
| gles as follows. |
| ||
|
|
|
| : Color pattern |
|
|
|
| |
|
|
|
| becomes dimmer. |
|
|
|
| |
|
|
|
| : Color pattern |
|
|
|
| |
|
|
|
| becomes darker, and |
|
|
|
| |
|
|
|
| switches to blue. |
|
|
|
| : Cancels the |
|
|
|
| |
|
|
|
| brightness adjustment |
|
|
|
| (factory setting). |
|
|
|
|
|
| NOTE |
|
| |
|
|
•Once you press to change the color pattern, the brightness returns to the factory setting.
•When you turn off the main unit, the brightness also returns to the factory setting.
•You cannot turn off the color pattern.
"A. STANDBY" stands for "Auto Standby".
Auto standby indicator
Auto standby performance
When playback or recording finishes, auto standby starts the countdown (The "A.STANDBY" indicator flashes). When no operation is carried out within 3 minutes, the main unit automatically turns off.
When you start playback or recording within 3 min- utes, auto standby starts the countdown again after playback or recording finishes.
When an operation other than playback and recording finishes and no operation is carried out within 3 minutes, the main unit automatically turns off.
"A. STANDBY OFF" starts to flash 20 seconds before the main unit is to turn off.
Canceling auto standby
Press once again.
NOTE
•Leaving the volume at "0" is not the same as pro- ducing no sound, and therefore does not start the auto standby function.
13