JVC UX-Q3S Specifying the Track Direct, Program Playback, Track Selection, Repeat Playback, Press

(Continued) Listening to CDs

Specifying the Track (Direct		Program Playback
Track Selection)
	This function allows you program up to 50 tracks.

Press the number buttons to select the track you want to listen to.

•Refer to "Using the number buttons" ( page 10).

Repeat Playback

This function allows you to repeatedly listen to the same track.

During CD playback, press repeat- edly to select the repeat mode.

•Each time you press , the display toggles as follows.

Example: While "REPEAT ALL" is selected

Repeat indicator

: For repeating all tracks in a disc.

:For repeating one group (only for MP3s).

: For repeating one track.

: For canceling repeat playback.

NOTE

•Ejecting the CD or turning off the main unit also cancels repeat playback.

1 Press , and then press .

2 Press to select "PROGRAM".

CD or MP3

Program indicator

3 Press the number buttons to select the track numbers.

•Refer to "Using the number buttons" ( page 10).

For CDs

Track number Program number

Total time for program playback

For MP3s

Track number

Program number

NOTE

•When you want to erase the program, press while playback is stopped. Programmed tracks are erased one by one from the last track. Holding

down erases all programmed tracks.

•When you try to program the 51st track, "MEM- ORY FULL" appears in the display window to indicate that 51 or more tracks cannot be pro- grammed.

•When total time for program playback reaches 1 hour 40 minutes, "--:--" appears.

•When you program tracks from an MP3, the total time is not displayed.

4 Press .

17