JVC UX-Q3S manual Using the Timers, Recording Timer, Sleep Timer, Changing the sleep timer setting

Using the Timers

Set the clock beforehand. ( page 10)

Number buttons

Confirming the sleep timer setting (remaining time)

• With the sleep timer activated, press once.

Recording Timer

You can use the recording timer function to record FM/AM broadcasts or sound from other equipment to a cassette tape.

You can enter up to three timer settings in total for the recording timer and the playback timer

( page 25).

NOTE

•Timer settings remain unchanged until the timer is replaced by new setting.

Sleep Timer

When the specified time passes, the main unit automatically turns off.

Press .

•Each time you press , the time display (in minutes) toggles as follows.

Cancel (Sleep indicator disappears.)

Example: To set the sleep timer to 60 minutes

Sleep indicator

NOTE

•When you set the sleep timer, the display window automatically dims.

•Before the clock has been set (While "0:00" is

flashing), when you press , "CLOCK ADJUST!" appears.

Changing the sleep timer setting

• Press repeatedly to select the time again.

1 Prepare the sound source.

Radio	Preset the radio station whose
	broadcast you want to record. (
	page 15)
Other	Follow the operation manual for the
equipment	equipment.

2 Insert a cassette tape. ( page

19)

3 Press repeatedly to select "TIMER1", "TIMER2" or "TIMER3".

Example: When "TIMER1" is selected

		Timer number
4	Press	.
5	Set the starting time and ending
	time.

Example:To set the recording time from 6:30 a.m. to 6:45 a.m.

•For setting the clock, refer to "Setting the

Clock" ( page 10).

Entering the hour → → Entering the minute →

23