JVC LVT1218-005A Connecting the Antennas, Connecting the AM antenna, Connect the antenna cord

Connections Connect all necessary parts before connecting the power plug.

Connecting the Antennas

Connecting the AM antenna

1 Set up the AM loop antenna (supplied).

■When radio reception with the supplied AM loop antenna is poor

Electric wire: 3 - 5 m (commercially available)

Preparation

Insert the tab into the slot.

Twist together electric wire and the AM loop antenna cord.

Stretch out the electric wire horizontally, preferably in a high place such as above a window or outdoors.

Connect the AM loop antenna cord to the main unit together with the electric wire.

2 Connect the antenna cord.

Main unit (side view)

Main unit (rear view)

Main unit (rear view)

Connecting the antenna cord

When insulation covers the tips of the antenna cord,

twist and pull off

the insulation. Connect the ends of

the antenna cord as shown above.

3 Turn the AM loop antenna to find the best position for radio reception.

Place the AM loop antenna as far from the main unit as possible.

•Do not place the AM loop antenna on a metallic table or close to a TV, computer, or other electric appliance. Doing so may affect radio reception.

When positioning the antennas, find the best position for reception while listening to an actual radio program

(refer to "Listening to Radio Broadcasts" ( page 14)).

6