Clarion DRX9675z owner manual Other Handy Functions Adjusting the dimmer level, Message display

Other Handy Functions

Other Handy Functions

Adjusting the dimmer level

You can adjust the reduced illumination level of

1. Press MODE button & four times to switch

to the adjustment selection display.

Setting the Background Color	Setting the Method for Title Scroll
(Pattern) on the Display (BG COLOR)	(A-SCROLL)

the dimmer.

∗The factory default setting is “5”.

∗To use the dimmer, set the dimmer setting to OFF to 5.

1.Press MODE button & four times to switch to the adjustment selection display.

2.Press VOLUME buttons 2 up (w) or down (z) to select “DIMMER LV.”.

3.Press the right side of SEARCH button 4 to move cursor.

4.Press VOLUME buttons 2 up (w) or down (z) to adjust the reduced illumination level of the dimmer.

● 1 to 5:

The dimmer operation is performed depending on the set level 1 to 5.

●OFF:

No dimmer operation is performed.

5.Press MODE button & or Press and hold ENT button $ for 1 second or longer to return to the previous mode.

2.	Press VOLUME buttons 2 up (w) or down
	(z) to select “EXTRA OUT”.
3.	Press the right side of SEARCH button 4 to
	move the cursor.
4.	Press VOLUME buttons 2 up (w) to set
	“ON” or down (z) to set “OFF”.
	● ON:

When you press MODE button & three times to select Audio Mode, the “EXTRA VOL” item is displayed.

∗The output level can be adjusted (–5~+5).

● OFF:

Even when you press MODE button & three times to select Audio Mode, the “EXTRA VOL” item is not displayed.

∗ The output level cannot be adjusted.

5.Press MODE button & or Press and hold ENT button $ for 1 second or longer to return to the previous mode.

Triggered audio mute for cellular telephones

Background Color (Pattern) on the Display

When the display is not showing I-BGV, a desired background color (pattern) can be set on the display.

∗The factory default setting is “BLCK” (black). Select a desired pattern referring to the display indication.

1.Press MODE button & four times to select the adjustment mode.

2.Press VOLUME buttons 2 up (w) or down (z) to select “BG COLOR”.

3.Press the right side of SEARCH button 4 to move the cursor to the right.

4.Press VOLUME buttons 2 up (w) or down (z) to select a background pattern.

5.Press MODE button & or press and hold ENT button $ for 1 second or longer to return to the previous mode.

●Background Pattern

BLCK (black)

↓

BLUE (blue)

Title Scroll

Title scroll is a function for scrolling the screen to the end of a long title not appearing in the title box. This function works while the text title (disc or artist of track) of CD or MD player is displayed.

∗The factory default setting is “ON”.

1.Press MODE button & four times to select the adjustment mode.

2.Press VOLUME buttons 2 up (w) or down (z) to select “A-SCROLL”.

3.Press the right side of SEARCH button 4 to make adjustments.

4.Press VOLUME buttons 2 up (w) or down (z) to select “ON” or “OFF”.

Every time VOLUME button 2 is pressed, the display is switched as shown below.

“ON” (The screen is scrolled automatically)

w

z

“OFF” (The screen is scrolled when the TITLE button # is pressed and held for 1 second or longer)

5. Press MODE button & or press and hold ENT

Message display

When the unit is powered on or off, a message is displayed. The user can turn this message

This unit requires special wiring to mute the au- dio signal automatically when a cellular telephone rings in the car.

↓

RED (red)

↓

button $ for 1 second or longer to return to

the previous mode.

display ON or OFF.

∗The factory default setting is “ON”.

1.Press MODE button & four times to switch to the adjustment selection display.

2.Press VOLUME buttons 2 up (w) or down (z) to select “MESSAGE”.

3.Press the right side of SEARCH button 4 to move the cursor.

4.Press VOLUME buttons 2 up (w) or down (z) to set message display ON or OFF.

5.Pressing ENT button $ returns to the adjustment selection display.

6.Press MODE button & or Press and hold ENT button $ for 1 second or longer to return to the previous mode.

Turning the EXTRA output adjustment display on/off

When not using the EXTRA output, you can put out the “EXTRA VOL” display.

∗The factory default setting is “ON”.

∗Even if the level adjustment display is set to “OFF”, signals can be output from the non-fader output.

∗This function is not compatible with all cellular tele- phones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

Setting the Background Spectrum Analyzer

Display of Background Spectrum Analyzer (BG SPE/ANA)

When the display is not showing I-BGV, SPE/ANA is shown on the right side of the display.

∗The factory default setting is “ON”.

1.Press MODE button & four times to select the adjustment mode.

2.Press VOLUME buttons 2 up (w) or down (z) to select “BG SPE/ANA”.

3.Press the right side of SEARCH button 4 to move the cursor to the right.

4.Press VOLUME buttons 2 up (w) or down (z) to select “ON” or “OFF”.

5.Press MODE button & or press and hold ENT button $ for 1 second or longer to return to the previous mode.

GREN (green)

↓

NEON (neon)

↓

CHEK (check)

↓

COIN (coin)

↓

ELEC (electric board)

↓

UFO (UFO)

↓

PINK (pink)

↓

SAND (sand)

↓

WIND (wind)

↓

FIRE (fire)

Setting the button illumination.

∗The factory default setting is “GREN” (green).

1.Press MODE button & four times to select the adjustment mode.

2.Press VOLUME buttons 2 up (w) or down (z) to select “ILLUMI”.

3.Press the right side of SEARCH button 4 to move the cursor to the right side.

4.Press VOLUME buttons 2 up (w) or down (z)to select “AMBR” (amber) or “GREN” (green).

5.Press MODE button & or press and hold ENT button $ for 1 second or longer to return to the previous mode.

16 DRX9675z DRX9675z 17