12EN

RECORDING BasicFeatures(cont.)

RETAKE (R/F)

QUICK REC

FEATURE:

Quick Review

PURPOSE:

To check the end of the last record-

 

ing.

OPERATION:

1) Press “ ” and release quickly

 

during the Record–Standby mode.

 

•Tape is rewound for about 2

 

seconds and played back

 

automatically, then pauses in

 

Record–Standby mode for the

 

next shot.

NOTE:

Distortion may occur at start of

 

playback. This is normal.

 

 

FEATURE:

Retake

PURPOSE:

To re-record certain segments.

OPERATION:

1) Make sure the camcorder is in the

 

Record–Standby mode.

 

2) Press either RETAKE button to

 

reach the start point for new

 

recording.

 

Pressing “F” fast-forwards the tape

 

and pressing “R” reverses it.

 

3) Press Recording Start/Stop to start

 

recording.

NOTE:

Noise may appear during Retake.

 

This is normal.

 

 

FEATURE:

Quick Rec

PURPOSE:

To record a scene for 5 seconds,

 

providing quick scene transitions like

 

those seen in TV programmes.

OPERATION:

1) During Record–Standby, press and

 

release QUICK REC. Recording

 

starts, and after 5-second record-

 

ing is finished, the camcorder

 

reenters the Record–Standby mode

 

automatically.

 

•To continue shooting longer than

 

5 seconds, press and hold

 

QUICK REC. Recording

 

continues as long as QUICK REC

 

is kept pressed.

NOTES:

The Fade/Wipe (pg. 19) cannot

 

be activated by pressing QUICK

 

REC.

 

QUICK REC cannot be used during

 

Animation and Time-Lapse

 

(pg. 27).

 

 

Page 12
Image 12
JVC LYT0002-082A manual Retake R/F Quick REC Feature, Quick Review, Quick Rec