JVC LYT0002-082A manual Picture Stabilizer, Exposure Control

18EN

RECORDINGAdvancedFeatures(cont.)

Picture Stabilizer

This feature compensates for unstable images caused by camera-shake, particularly noticeable at high magnifica- tion.

ACTIVATE PICTURE STABILIZER

1 Press P.STABILIZER. “” appears in the viewfinder. •To switch off the Picture Stabilizer, press

P.STABILIZER. The indicator disappears.

NOTES:

	● Accurate stabilization may not be possible if hand
	shake is excessive, or under the following conditions:
	• When shooting subjects with vertical or horizontal
	stripes
	• When shooting dark or dim subjects
	• When shooting subjects with excessive backlighting
	• When shooting scenes with movement in various
	directions
	• When shooting scenes with low-contrast
P. STABILIZER	backgrounds
	● Switch off Picture Stabilizer when recording with the
	camcorder on a tripod.

+

+02

–Exposure Level Indicator

To brighten the image

–06 +06

Exposure Control

This feature automatically adjusts the iris for the best available picture quality, but you can override and make the adjustment manually.

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

BRIGHTEN IMAGE

2 Press + (maximum +06). The Exposure level indicator appears in the viewfinder.

OR . . .

DARKEN IMAGE

Press – (maximum –06). The Exposure level indicator appears in the viewfinder.

When you want to return to the factory setting . . .

RESTORE INITIAL SETTING

3 Press + and – simultaneously. The standard setting is immediately restored and the Exposure level indicator disappears.

To darken the image