JVC 0397MKV*UN*YP Play button, Pause button, Lock lever, Unlock button, Digital jack p, Port

CONTROLS AND CONNECTORS 11

The controls and connectors marked * can be used only when the GR-DVM1 Digital Camcorder is attached. For details of its operation, read the camcorder instruction manual.

* Stop button	* Play button
* Rewind button		* Pause button
* Fast forward button			* Edit start button

* Lock lever

* Unlock button

* Digital jack ☞ p. 13

• Connect to the computer’s

RS-232C terminal (COM

port).

* MULTI connector	JLIP jack ☞ p. 13
• The Docking Station can be connected with	(JLIP: Joint Level Interface Protocol)
the GR-DVM1 through this connector.	•Connect to a JLIP-compatible
Never touch it with your hand or hit it with	comcorder or VCR to control it from
a hard object; if the pins are damaged, the	the computer.
connectors will become unusable due to
contact failure.

	* DC output jack
* S2 (Video) output jack	•For dealer use.
•Outputs the S-VIDEO signal.
(Also compatible with S1 and S2
connectors.)
DC input jack ☞ p. 13
* Video output jack	* Remote control sensor
* Audio output jack (Left)
	•Receives the remote
* Audio output jack (Right)	control signals for the
	attached Camcorder.
	* Edit jack

Capture input (EXT.)/printer connector

☞p. 13

•Connect with the video output (stored image output) of the optional video printer. Even when a TV is not connected to the video printer, this connection allows you to see the images output from the video printer on the LCD screen while printing.

•The date and timecode are not shown on the LCD screen. If you want to print out the date together with the images, connect a TV to the video output connector of the video printer and operate it by referring to the TV screen.

•It is also possible to capture images from video equipment other than the GR-DVM1by connecting the equipment to this connector. To make this operation possible, also attach the GR-DVM1 and set its power switch to record mode without loading a tape.