JVC 0597TOV*UN*VP, LYT0002-0Q4A Connect To, Prepare Camcorder, Prepare Vcr, Make Connections

To AUDIO and VIDEO connectors

A/V cable (optional)

To AUDIO, VIDEO and S -IN connectors

Open the cover

To J terminal (JLIP)

To S -VIDEO connector

S-VIDEO cable (optional)

Editing cable (provided)

39

MAKE CONNECTIONS

CONNECT TO . . .

1 A JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE terminal.

BJVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR.

Connect the editing cable to the R.A. EDIT connector.

CVCR OTHER THAN TYPE A OR B

Connect the editing cable to the RM-V704U/ V700U’s Pause-In jack.

PREPARE CAMCORDER

2 Insert a recorded tape and set the Power switch to “PLAY”.

PREPARE VCR

3 Turn the power on, insert a recordable tape and engage the AUX mode (refer to VCR’s instructions).

If your VCR has the SCART connector, use the provided cable adapter.

VCR (Recording deck)

“Y/C”/“CVBS” video out select switch

ATo Remote

BPAUSE

CTo Pause-In

NOTES:

●If your VCR has an S-VIDEO input connector or a SCART connector compatible with Y/C signals, connect the camcorder and the VCR using the S-VIDEO cable. This can improve the dubbed picture quality.

●If you use the provided cable adapter, set the “Y/C”/ “CVBS” video out select switch as required.

Y/C : When connecting to a VCR which accepts Y/C signals and uses an S-VIDEO cable.

CVBS : When connecting to a VCR which does not accept Y/C signals and uses an audio/video cable.

RM-V704U or RM-V700U (provided)