JVC LYT0002-0Q4A Usermaintenance, After Use, Cleaning The Camcorder, Clean Exterior, Clean Lens

Models: LYT0002-0Q4A 0597TOV*UN*VP

1 56
Download 56 pages 21.28 Kb
Page 46
Image 46
Set to “POWER OFF”.

46USERMAINTENANCEAfter UsePUSHEJECTCleaning The CamcorderCLEAN EXTERIORCLEAN LENSCLEAN VIEWFINDERManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

LENS COVER open/close switch

Set to “POWER OFF”.

BATT. RELEASE

Manual backgroundManual backgroundManual backgroundUSERManual backgroundMAManual backgroundINTENANCEManual background

After Use

1 Set the Power switch to “POWER OFF” to turn off the camcorder.

2 Slide EJECT to open the cassette holder, then remove the cassette.

3 Close and lock the cassette holder by pressing PUSH.

4 Press BATT. RELEASE to remove the battery pack.

5 Slide the LENS COVER open/close switch to close the lens cover.

PUSHManual background

EJECT

Remove

Marks

Cleaning The Camcorder

CLEAN EXTERIOR

1 Wipe gently with a soft cloth.

CLEAN LENS

2 Blow it with a blower brush, then wipe gently with lens cleaning paper.

CLEAN VIEWFINDER

3 1 Turn the eyepiece counterclockwise and pull it out.

2 Remove dust using a blower brush.

3 Align the marks, re-attach the eyepiece and turn it clockwise.

NOTES:

Avoid using strong cleaning agents such as benzine or alcohol.

Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

Mould may form if the lens is left dirty.

Page 46
Image 46
JVC LYT0002-0Q4A Usermaintenance, After Use, Cleaning The Camcorder, Clean Exterior, Clean Lens, Clean Viewfinder, Push