10
EN
GETTING
STARTED
Charging The Battery Pack
You can charge one battery pack at a time, or two consecutively.
ATTACH | Battery pack | DETACH |
|
| |
To AC outlet | Power cord | Power cord |
Charger indicator 1
Power lamp
AC Power
Adapter/Charger
AA-V68U
DC OUT jack
Charger indicator 2
1 SUPPLY POWER TO CHARGER Plug the AC Adapter/Charger’s power cord in to an AC outlet. The power lamp comes on.
ATTACH BATTERY/BATTERIES | |
2 Attach while making sure the | marks are |
facing down and aligned with the correspond- ing marks on the AC Power Adapter/Charger.
•The Charger Indicator (1 or 2) begins blinking to indicate charging has started.
3 CONFIRM STATUS
When the charger indicator stops blinking but stays lit, charging is finished.
•If two batteries are attached to the charger, they will be charged in the order that they were attached.
4 DETACH BATTERY/BATTERIES
Slide the battery or batteries in the direction of the arrow and lift off.
•Remember to unplug the AC Adapter/Charger’s power cord from an AC outlet.
Approximate charging time (unit: min)
Battery | No. of batteries | ||
|
| ||
ONE | TWO | ||
| |||
|
|
| |
| 90 | 180 | |
|
|
| |
| 180 | 360 | |
(optional) |
|
| |
|
|
| |
NOTES:
●If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.
●When using the AC Power Adapter/Charger, be sure to use the supplied power cord only.
●When charging the Battery Pack for the first time or after a long storage period, the Charger Indicator may not light. In this case, remove the Battery Pack from the AC Power Adapter/Charger, then try charging again.
●Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in
●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.
Please purchase a new one.
