1 CONFIRM POWER-OFF STATUS Make sure the camcorder’s power is off.

2 CONNECT CAMCORDER TO TV OR VCR Pull out the connector cover and open it. Connect as shown in the illustration (pg. 54).

If Using A VCR . . . go to step 3.

If not . . . go to step 4.

3 CONNECT VCR OUTPUT TO TV INPUT Refer to your VCR’s instruction manual.

4 TURN ON POWER

Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial and turn on the TV/VCR.

5 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(pg. 52).

• Playback Sound Mode Display

.... set the Power Dial to “

M

”, press the MENU

 

 

button, and set “ON SCREEN” in the Date/ Time Menu (pg. 13) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

EN55

NOTES:

It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack. (pg. 12)

Never connect any other VIDEO/AUDIO cable than the provided VIDEO/AUDIO cable to the camcorder’s AV OUT connector.

When using the provided VIDEO/AUDIO cable, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves performance of equipment.

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

To keep the camcorder's display from appearing on the TV screen during playback, press the IND.ON/OFF button for longer than 1 second.

Page 55
Image 55
JVC LYT0152-001B manual Turn on Power, Select TV’S Video Mode