JVC LYT0152-001B manual Remote Control Unit, Installing The Battery, RE-INSERT Holder

18EN

Remote Control Unit

GETTINGSTARTED(Cont.)

You can use the RM-V705B to control the camcorder. When using the remote control, be sure to point it at the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or powerful lighting.

Infrared beam transmitting window

ZOOM (T/W) buttons	T	START/STOP button (☞ pg. 20)
(☞ pg. 50)

W

PLAY button (☞ pg. 50)

STOP button (☞ pg. 50)

REW button (☞ pg. 48)

PAUSE button (☞ pg. 49)

FF button (☞ pg. 48)

Installing The Battery

The RM-V705B uses one lithium battery (CR2025).

1 PULL OUT BATTERY HOLDER Pull out the battery holder by inserting a pointed instrument into the slot.

2 INSERT BATTERY IN HOLDER Insert the battery in the holder, and be sure to have the “+” mark visible.

3 RE-INSERT HOLDER

Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries (☞ pg. 2).

Slot