JVC MX-K35V manual Setting the Daily Timer, Using the Timers, English, Using the Unit

Models: MX-K35V

1 36
Download 36 pages 53.06 Kb
Page 28
Image 28
Using the Timers

English

Using the Timers

 

 

 

2. Press the ¢or 4button to set the minute, then press the

Setting the Daily Timer

SET button.

 

 

 

 

Once you have set the Daily Timer, the timer will be activated at

 

the same time every day.

 

The Timer indicator ( ) on the display shows that the Daily Tim-

DAILY

er you have set is in effect.

 

You can set the Daily Timer whether the System is turned on or

“OFF TIME” appears for 2 seconds, and the System enters

off.

OFF-time setting mode. The current OFF time appears on

 

 

 

 

 

 

the display, and the hour digits blink.

 

 

 

 

 

 

 

 

 

 

• Perform each setting within 30 seconds. Otherwise, set-

 

ting will be cleared and the procedure must be repeated from the beginning.

If you have made a mistake while setting the timer, press the CANCEL button on the Unit. However, this does not al- ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Unit repeatedly until the display returns to the original dis- play, and start from the first step.

Using the Unit

1 Press the % button to turn on the System.

2 Press the CLOCK/TIMER button until “ON TIME” immediately after “DAILY” appears on the display.

At this time, “DAILY” indicator blinks and the Timer indica- tor ( Setting the Daily Timer) lights up on the display.

Each time you press the button, the display changes as follows: DAILY =ON TIME* =REC =ON TIME =Clock setting display = Canceled = (back to the beginning)

* : This item should be selected for the Daily Timer setting.

After 2 seconds

DAILY

DAILY

4 Setting the OFF time (Example: 13:15).

1.Press the ¢ or 4 button to set the hour you want the System to come off, then press the SET button.

The minute digits of the OFF time blink on the display.

DAILY

2.Press the ¢or 4button to set the minute, then press the SET button.

After 2 seconds, the System enters ON-time setting mode. The cur- rent ON time appears on the display and the hour digits blink.

After 2 seconds

DAILY

 

DAILY

3 Setting the ON time (Example: 10:15).

1.Press the ¢ or 4 button to set the hour you want the System to come on, then press the SET button.

The minute digits of the ON time blink on the display. Pressing the ¢button moves the time forwards and press- ing the 4 button moves it backwards.

Holding down the button moves the time rapidly.

DAILY

DAILY

The System enter Music Source Selecting mode and “TUN- ER FM” appears on the display.

DAILY

5 Selecting the music source.

Press the ¢ or 4 button to select the music source you want to listen to, then press the SET button.

Each time you press the ¢or 4button, the display chang- es as shown below:

TUNER FM =TUNER AM =– CD – – – =TAPE =AUX

=(back to the beginning)

According to the music source you have selected, the next op- eration differs.

TUNER FM: Tunes in to the specified preset FM station.

TUNER AM: Tunes in to the specified preset AM station.

CD – – : Plays the specified track on the specified CD.

TAPE: Plays a tape in the selected Deck (A or B).

AUX: Plays an external source.

25

Page 28
Image 28
JVC MX-K35V Setting the Daily Timer, Using the Timers, English, Using the Unit, Press the % button to turn on the System