Using the CD Player (Digital Audio CDs, MP3 Discs)
English
To Load CDs
1 Press the CD Open/Close 0 button on the
Unit to open the tray.
2 Place a CD, with its label side up, onto the tray.
Be sure that the CD is securely seated on the disc tray.
With the label side up
3 Press the DISC SKIP button on the Unit and place the next CD.
When you press the button, the tray turns for the next CD.
4 Repeat step 3 for the last CD.
5 Press the CD Open/Close 0 button on the
Unit.
The tray is closed.
❏When you use an 8 cm CD, place it on the inner circle of the tray.
❏You can load CDs while listening to the other source.
❏When power is turned off with the tray opened, the tray is auto- matically closed.
❏If the CD cannot be read correctly (because it is scratched, for example), “ 0 0:00” appears on the display.
To Unload CDs
Take out the CD as shown below.
1 While the CD Player is stopped, press the CD Open/Close 0 button on the Unit to open the tray.
2 Remove the CD, then press the DISC SKIP button on the Unit.
The tray turns for the next CD.
Basics of Using the CD Player- Normal Play
To Play CDs
1 Load CDs.
2 Press one of the Disc button
The selected disc number (e.g.
The first track of the selected CD begins playing. When the first CD finishes playing, the next and the third CDs are con- tinuously played back.
When the last CD has finished playing, the CD Player auto- matically stops.
Examples:
CD1 = CD2 = CD3 = (stop)
CD2 = CD3 = CD1 = (stop)
❏You can start to play the currently selected disc by simply press- ing the CD 6 button.
While playing the CD, the following will appear on the display.
1
2
3
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Track number | Elapsed | CD is playing. | |||||
|
| playing time |
|
|
| ||
•When the Disc button
opened, the tray is closed and the selected CD automatically begins playing.
To stop playing the CD, press the 7 button. The following in- formation for the CD is displayed.
1
2
3
Total track number | Total playing time |
(After 5 seconds) |
|
1
2
3
Track number | Playing time |
3 Repeat step 2 to remove all the CDs.
4 Press the CD Open/Close 0 button on the
Unit to close the tray.
❏You can remove CDs while listening to the other source.
•You can also remove the CDs during playback. However, in this case, you can only remove the CDs that are not be- ing played back.
To pause, press the CD 6 button. The playing time indication blinks on the display.
To cancel pause, press the CD 6button again. Play continues from the point where it was paused.
To remove the CD, stop playing and press the CD Open/Close
0button on the Unit.
Tips:
•Playing back the CD using the DISC SKIP button
You can also play the CDs using the DISC SKIP button. During playback, each time you press the button, the next CD is automat- ically played back. If the next disc tray is empty, the disc tray is automatically skipped.
12
