| Using the Microphone | |
To Apply Digital Echo |
| |
Playing the Microphone Sound | ||
Press the ECHO button on the Remote Control. | ||
The Echo indicator ( ) comes on. | through the Speakers | |
To cancel the ECHO, press the ECHO button again. The Echo |
| |
| ||
indicator goes off. | You can directly output the microphone sound from the speakers. | |
|
English
No echo is applied. | An echo is applied. |
•To prevent howling and squealing (feedback) when using the microphone, adjust the volume properly. Also, try to avoid to pointing the microphone towards the speakers.
To Record Your Singing
1 Follow the steps in “Singing Along with Karaoke” above.
2 Prepare a tape and source, then press the REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 22.
Microphone Mixing
When using special Karaoke sources for Karaoke, use the follow- ing procedure.
1 Turn the MIC VOL control on the Unit to MIN. 2 Connect a microphone by plugging it into the
MIC jack.
3 Start a source CD, tape, or other equipment.
4 Adjust the volume, as you sing into the microphone.
To adjust the volume, use the MIC VOL control and VOL- UME control on the Unit or the VOLUME +, – button on the Remote Control.
•When you want to apply echo to the microphone, press ECHO button on the Remote Control. The Echo indicator (
) will come on.
To Record Microphone Mixing
1 Follow the steps in “Singing Along with Karaoke” above.
2 Prepare a tape and source, then press the REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 22.
1 Turn the MIC VOL control on the Unit to MIN. 2 Connect a microphone by plugging it into the
MIC jack.
3 Adjust the volume, as you sing into the microphone.
To adjust the volume, use the MIC VOL control and VOL- UME control on the Unit or the VOLUME +, – button on the Remote Control.
•When you want to apply echo to the microphone, press ECHO button on the Remote Control. The Echo indicator (
) will come on.
Recording from the Microphone
1 Follow the steps in “Singing Along with Karaoke” above.
2 Prepare a tape and source, then press the REC START/STOP button on the Unit.
For details, see “Standard Recording” on page 22.
30
