JVC MX-K35V manual Connecting a TV, Connecting External Equipment, Connecting to the Wall Outlet

Models: MX-K35V

1 36
Download 36 pages 53.06 Kb
Page 9
Image 9
Connecting a TV

Getting Started

Connecting a TV

Connect a video cord (supplied) between the System’s VIDEO OUT terminal and the video input jack of your TV.

Do not connect a cable between the LINE-OUT terminals and the audio input terminals of an external TV. If it is connected, noise may be generated depending on the TV to be used.

Video cord

TV (not supplied)

Connecting External Equipment

Connect signal cords (not supplied) between the System’s AUX-IN/LINE OUT terminals and the output/input terminals of the external MD recorder, tape deck, etc.

Then you can listen to or record from the external source through the System.

Signal cord (not supplied)

MD recorder, tape deck, etc. (not supplied)

Pin-plug x 2

Pin-plug x 2

Pin-plug x 2

Pin-plug x 2

Connecting to the Wall Outlet

Plug the AC power cord into the wall outlet.

Now, your System is at your command!

COMPU Play

JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.

With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD or tape in place), the System still powers on so you can insert a CD or tape.

How One Touch Operation works in each case is explained in the section dealing with that function. The COMPU PLAY buttons are:

On the Unit

On the Remote Control

CD 6 button

CD 6 button

FM/AM button

FM/AM button

TAPE 3 button

TAPE 3 button

AUX button

AUX button

CD1, CD2 and CD 3 buttons

CD1, CD2 and CD 3 buttons

CD Open/Close 0 button

 

English

6

Page 9
Image 9
JVC MX-K35V manual Connecting a TV, Connecting External Equipment, Connecting to the Wall Outlet, COMPU Play, On the Unit