Basic Operations
Adjusting the Volume
Turn the VOLUME control on the Unit clockwise to increase the volume or turn it counterclockwise to decrease the volume.
Press the VOLUME + button on the Remote Control to increase the volume or press the VOLUME – button on the Remote Control to decrease the volume.
You can set the volume level to MIN,
•When you turn the power off at a volume level of over 19, the volume level is automatically set to 19 when the power is turned back on.
CAUTIONS:
•DO NOT turn on the System and/or start playing any source without first setting the VOLUME control to minimum, as a sudden blast of sound could damage your hearing, speakers and/or headphones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or putting on headphones.
Selecting the Sound Mode
(SOUND MODE)
You can select one of 3 SEA (Sound Effect Amplifier) modes. You can use this effect only for playback.
To get the effect, press the SOUND MODE button until Sound Mode you want appears on the display.
The SOUND MODE indicator lights up in the display.
Each time you press the button, the SOUND MODE changes as follows:
ROCK =POP = CLASSIC =FLAT =(back to the beginning)
To cancel the effect, press the SOUND MODE button until “FLAT” appears on the display.
The “SOUND MODE” indicator goes off.
ROCK | Boosts low and high frequencies. Good for |
POP | acoustic music. |
Good for vocal music. | |
CLASSIC | Set for wide and dynamic sound stereo |
FLAT | systems. |
No sound effect applies. |
Entering the Number with the Remote Control (Numeric Keys)
You will use the number keys on the Remote Control to enter num- bers for presetting stations, recalling the preset stations, or pro- gramming the playing tracks on CDs.
How to enter the number with the number keys is explained here.
English
Fade-out Muting (FADE MUTING)
You can mute the output with one touch operation.
To muting the output, press the FADE MUTING button on the Remote Control. The output is faded out.
To release muting, press the FADE MUTING button once again. The output is faded in to the previous level.
•After
Emphasizing the sound
(SOUND TURBO)
High and low frequencies are highly boosted.
To get the effect, press the SOUND TURBO button.
The SOUND TURBO indicator lights up and
To cancel the effect, press the button again.
The SOUND TURBO indicator goes out and “OFF” appears on the display.
Examples:
•To enter number 5, press 5.
•To enter number 15, press 
10 = 1 = 5.
•To enter number 20, press 
10 = 2 = 0. (For MP3/WMA disc only)
•To enter number 125, press 
10 (2 times) = 1 = 2 = 5.
Changing the Display
On the Remote Control ONLY
Each time you press the DISPLAY button, the display changes as shown below:
Currently selected source ï Current time
8
