JVC MX-KC45 manual Press STANDBY/ON button to turn, Off the System, if necessary, Display

English

Using the Timers

On the Unit	8 Press the	STANDBY/ON button to turn
You can set the time in the same way as for setting the Daily Tim-	off the System, if necessary.
er.	The Timer indicator ( ) and “REC” indicator are lit on the
1 Insert a blank or erasable tape into the Deck
	display, showing that the Rec Timer is set to on.
B and wind past the tape leader.	To confirm / change the timer setting, repeat the setting pro-
2 Press the CLOCK/TIMER button until “ON	cedure from the beginning.
TIME” immediately after “REC” appears on	When the timer ON-time comes:
the display.	• When the timer ON-time comes, the System automatically
Each time you press the button, the display changes as follows:	turns on. The station you have set is played. The Timer indica-
DAILY =ON TIME =REC =ON TIME* =Clock setting	tor ( ) and Tape indicator (3) blink, and the “REC” indicator
display = Canceled = (back to the beginning)	lights during timer operation.
*: This item should be selected for the REC Timer setting.	To stop timer recording, press the 7 button.
Then, the System enters ON-time setting mode. The current	• When the timer OFF-time comes, the System automatically turns
	off.
ON time appears on the display and the hour digits blink.

• If the System is already on when the timer ON-time comes, the REC Timer does not work.

To cancel the REC Timer temporarily:

3 Setting the ON time you want the System to turn on.

1.Press the 4 or ¢ button to set the hour, then press the SET button.

2.Press the 4or ¢button to set the minute, then press the

SET button.

“OFF TIME” appears and then the System enters OFF-time setting mode. The current OFF time appears on the display, and the hour digits blink.

4 Setting the OFF time you want the System to turn off.

1.Press the 4 or ¢ button to set the hour, then press the SET button.

2.Press the 4or ¢button to set the minute, then press the

SET button.

The System enters Preset Station Entering mode.

1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC” appears on the dis- play.

2 Press the CANCEL button on the Unit.

“OFF” appears and both the Timer indicator ( ) and the “REC” indicator go out.

To activate the cancelled REC Timer:

1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC” appears on the dis- play.

The Timer indicator ( ) lights and the “REC” indicator blinks on the display.

2 Press the SET button on the Unit.

“REC SET” appears on the display. The Timer indicator ( ) and the “REC” indicator remain lit, and the display returns to the original display.

5 Select the preset station for recording.	• If the System is unplugged, or a power failure occurs,
1. Press the 4or ¢button to set the band (TUNER FM or	the timer setting will be lost in a few days. You will
TUNER AM), then press the SET button.	need to reset the clock first, then the timer.
2. Press the 4 or ¢ button to set the preset number, then
press the SET button.
When “P---” is selected, the last station you were listening to
will be set.
6 Setting the volume level.
Press the ¢ or 4 button to select the volume level.
MIN, 1-30, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.

7 Press the SET button.

The timer setting is completed and the display returns to the display before you set the Timer.

23