JVC PC007182399-1 warranty Structure of the Settings menu, Picture Adjust, Input Signal

4 Settings

The structure of the Settings menu

The menu for this device is structured as follows:

CAUTION

●There are items that cannot be modified without entry.

Picture Adjust

	Picture Mode	Adjusts the pattern of the projected image.
01
		Setting: Cinema 1, Cinema 2, Cinema 3, Natural, Stage, Dynamic, User 1, User 2, THX
	Contrast	Adjusts the contrast of the projected image.
02
		Setting: –50 to 50
	Brightness	Adjusts the brightness of the projected image.
03
		Setting: –50 to 50
	Color	Adjusts the color density of the projected image.
04
		Setting: –50 to 50
	Tint	Adjusts the hue of the projected image.
05
		Setting: –50 to 50
	Color Temp.	Sets the color temperature of the projected image.
06
		Setting: 5800K, 6500K, 7500K, 9300K, High Bright, Custom 1, Custom 2, Custom 3
	Gamma	Sets the gradation characteristics of the projected image.
07
		Setting: Normal, A, B, C, D, Custom 1, Custom 2, Custom 3
	Advanced	Adjusts the contours of the image and detailed composition of the image.
08
		Setting: Sharpness, NR, CTI, Color Management, Clear Motion Drive
	Lens Aperture	Sets the lens aperture.
09
		Setting: –15 to 0
	Reset	Reset the setting.
10

Input Signal

	HDMI	Configures HDMI input signal.
11
		Setting: Input, Color Space, Control with HDMI
	COMP.	Configures the input signal for the component video input terminals.
12
		Setting: Y Pb/Cb Pr/Cr, RGB, SCART
	Video/S-Video	Configures the Video/S-Video input signals.
13
		Setting: NTSC, Setup Level, Color System
	PC	Configures PC input.
14
		Setting: Auto Alignment, Tracking, Phase, Picture Position
	Picture Position	Adjusts the horizontal/vertical position of the projected image.
15
	Aspect (Video)	Configures the screen size of the projected image.
16
		Setting: 4:3, 16:9, Zoom
	Aspect (Computer)	Configures the screen size of the projected image.
17
		Setting: Auto, 1:1, Full
	V-Stretch	When set to “On”, the projected 2.35:1 image will be stretched vertically to the panel resolution.
18
		Setting: On, Off
	Over Scan	Selects whether or not to set over scan for the SD video signal.
19
		Setting: On, Off
	Mask	Masks (Hides) the outer area of the projected image.
20
		Setting: 2.5, 5, Off
	Film Mode	Selects this to view movies shot on film.
21
		Setting: Auto, film, Off

28