Installation, Display Setup, Function | JVC PC007182399-1 guide

Installation

	Lens Control	Controls the individual motorized function of the lens when setting up the projector.
22
22		Setting: Focus, Zoom, shift, Image pattern, Lock
		Setting: Focus, Zoom, shift, Image pattern, Lock

		Makes fine adjustments of 1 pixel unit for each minor color shift in the horizontal/vertical direction
	Pixel Adjust	of the image.
23	Pixel Adjust	of the image.
		Setting: horizontal and vertical
	Installation Style	Flips the image to the left or right, up or down according to the projection state of the projector.
24
24		Setting: Front, Ceiling Mount (F), Rear Ceiling Mount (R)
		Setting: Front, Ceiling Mount (F), Rear Ceiling Mount (R)

	Keystone	Compensates for trapezoidal distortion caused by installation.
25	Keystone

	Screen Adjust	Corrects skewed white balance derived from the reflective characteristics of the screen.
26
26		Setting: Off, A, B, C
		Setting: Off, A, B, C

	Back Color	Configures the screen color displayed when there is no input signal.
27

		Setting: Blue, Black
		Setting: Blue, Black

	Menu Position	Sets the display position of the menu. The possible positions for displaying the menu are at the
28
28		four corners or at center of the screen.
		four corners or at center of the screen.
	Menu Display	Sets the duration for displaying the menu.
29		Sets the duration for displaying the menu.
29		Setting: 15sec, On
		Setting: 15sec, On
	Line Display	Sets whether to display the input setting when switching the input.
30
30		Setting: 5 sec, Off
		Setting: 5 sec, Off
	Source Display	Sets whether to display the source of input signals when changing the input.
31
31		Setting: On, Off
		Setting: On, Off

	Logo	Sets whether to display “Logo” during startup.
32		Sets whether to display “Logo” during startup.
32		Setting: On, Off
		Setting: On, Off
33	Language	Sets the language of the menu display (12 languages).

	Lamp Power	Configures the output of the light-source lamp.
34		Configures the output of the light-source lamp.
34		Setting: Normal, High
		Setting: Normal, High

	Trigger	Configures the output of Trigger terminal.
35		Configures the output of Trigger terminal.

		Setting: Off, On(Power), On(V-Stretch)
		Setting: Off, On(Power), On(V-Stretch)
	Test Pattern	Display 6 types of test patterns.
36	Test Pattern	Display 6 types of test patterns.

	Off Timer	Automatically powers off when there is no operation for a certain duration.
37

		Setting: 1 hour, 2 hours, 3 hours, 4 hours
		Setting: 1 hour, 2 hours, 3 hours, 4 hours

	High Altitude	Selects this when using the projector in a location of low atmospheric pressure (higher than 900
38
38		meters above sea level).
	Mode	meters above sea level).
	Mode	Setting: On, Off
		Setting: On, Off

Input Image Connector, Input Source Name, PC resolution, PC H Frequency, PC V Frequency, Deep Color Depth, and Lamp Use are displayed.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others