ENGLISH
Input Signal > Aspect (Video)
16Aspect (Video)
Configures the screen size of the projected image.
| 4:3 | Sets the screen size of the projected image as 4:3. |
| 16:9 | Sets the screen size of the projected image as 16:9. |
| Zoom | Zooms the images. (This item cannot be selected in the case of HD signals.) |
●This setting can also be configured from the remote control. (
P14)
●The items cannot be set in the case of PC signals.
Input Signal > Aspect (Computer)
17Aspect (Computer)
Configures the screen size of the projected image.
| Auto | Enlarges the PC signal horizontally/vertically until it fits the panel height, and displays |
| it in the original aspect ratio. | |
|
| |
| 1:1 | Displays the PC signal corresponding to the panel at one dot per pixel ratio. The PC |
| screen can be shown in the original size. | |
|
| |
| Full | Enlarges the PC signal horizontally/vertically. |
●This setting can also be configured from the remote control. (
P14)
●This setting cannot be set in the case of SD or HD signals.
Input Signal > V-Stretch (when HD or SD video signals are input)
18
When set to “On”, the projected 2.35:1 image will be stretched vertically to the panel resolution.
| On | The projected 2.35:1 image will be stretched vertically to the panel resolution. |
| Off | Projects the 2.35:1 image |
●This setting cannot be set in the case of PC signals.
“Off” |
| “On” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Signal > Over Scan
19 Over Scan
Selects whether or not to set over scan for the SD video signal.
| On | Over scan the top, left, bottom and right at 2.5% each. |
| Off | Do not over scan. |
●This setting is not available when HD signal or PC signal is input.
Getting Started
Preparation
Basic Operation
Settings
Troubleshooting
Others
37
