ENGLISH
Function > Trigger
35Trigger
Configures the output of Trigger terminal.
| Off | Do not activate. |
| On(Power) | Move the screen UP/DOWN in conjunction with the power. |
| Operate the anamorphic lens in conjunction with the |
Function > Test Pattern
36 Test Pattern
Display 6 types of test patterns. For checking the color condition and tone, and the pixel size. Use whenever necessary.
●This can also be displayed by the remote control. (
P14)
Function > Off Timer
37 Off Timer
Automatically powers off when there is no operation for a certain duration.
| Off | Disables the off timer. |
| 1 hour | Auto power off after 1 hour. |
| 2 hours | Auto power off after 2 hours. |
| 3 hours | Auto power off after 3 hours. |
| 4 hours | Auto power off after 4 hours. |
Function > High Altitude Mode
38 High Altitude Mode
Selects this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
| On | Enable. |
| Off | Disable. |
Information
| Input | Displays the currently selected video input. |
| Source | Displays the type of the current video input signal. |
| (If PC signal is input, this item cannot be displayed) | |
|
| |
| Resolution | In the case of PC signal, the resolution is displayed. |
| H Frequency | In the case of PC signal, the horizontal frequency is displayed. |
| V Frequency | In the case of PC signal, the vertical frequency is displayed. |
| Deep Color | Displays the bit depth (color depth) of the video signals input from the HDMI terminals. |
| [Deep Color is not displayed when Y Cb Cr (4:2:2) is input.] | |
|
| |
| Lamp Time | Displays the accumulated hours of usage of the |
Getting Started
Preparation
Basic Operation
Settings
Troubleshooting
Others
41
