RECORDING
ÖDuring recording, the ALC (Automatic Level Control) circuit automatically optimizes the recording level, so manual recording level adjustment is unnecessary.
ÖCheck that the safety tab on the cassette tape is not broken off.
Note:
This unit has recording characteristics suitable for normal and CrO2 tapes. Normal and CrO2 tapes have different characteristics from metal tapes.
Synchronized recording with the CD player
ÖIn this system, the CD player starts play when the cassette deck enters the recording mode.
Operate in the order shown
5 1
3 2
SLEEP
ON/STANDBY
AHB PRO | ACS | SOUND |
PRESET | ONE TOUCH | |
AUX | TUNING | REC |
STANDBY AHB PRO ACS BEAT CUT
OPEN
DOWN 
UP
|
| VOLUME |
|
|
| BAND |
|
C D | TAPE | TUNER |
|
MULTI CONTROL | C D | ||
|
| AUX | |
REW | STOP | FF |
|
|
| REVERSE MODE | REW |
4
DISPLAY
SET
PROGRAM
RANDOM
AUTO
PRESET REPEAT
TUNER
TAPE BAND
FM MODE
MULTI CONTROL FF
SOUND ACS
1Load a CD and close the CD door.
2Press the CD 3/8 button to engage the CD mode, then press the 7 STOP button to enter the stop mode.
3Load a cassette with side A facing out. (Wind past the tape leader before starting recording.)
ÖMake sure the tape direction is set to 3(forward direction).
4Select the required reverse mode (
or 
) using the remote control unit.
ÖWhen programmed play is required, program the required tracks using the remote control. (See page 15.)
ÖSelect tracks with a total playing time which does not exceed the tape length (refer to the liner notes).
5Press the ONE TOUCH REC button; synchronized recording will start.
ÖRecording starts in the forward direction and CD play starts automatically.
ÖThe forward direction indicator (3) blinks and the REC indicator lights up in the display window.
Ö
ÖWhen the CD player stops, the tape deck stops automatically.
ÖTo stop recording in the middle, press the 7STOP button. The cassette deck also stops after 4 seconds.
Notes:
ÖDuring CD synchro recording, the CD 3/8 and (4, ¢) buttons do not function.
ÖIf a recording is completed in the reverse direction (2), it is possible to continue recording without changing the direction to forward (3), until the tape ends.
ÖIf continuous play 
is selected, a recording in the reverse direction (2) automatically stops at the end of the tape. The 
indicator appears in the display window during recording.
ÖCD complete recording function (Synchro recording mode only) If the tape is reversed while a CD is being played, recording will be done on the reverse side of the tape as follows:
*When less than 10 seconds of the last tune on the forward side of the tape have been recorded, recording on the other side of the tape will start from the beginning of the previous track.
*When more than 10 seconds of the last tune on the forward side of the tape have been recorded, recording on the other side of the tape will start from the beginning of the current track.
AHB PRO
VOLUME
Useful functions for recording
When the tape direction is set to 2(reverse direction) after a cassette
tape is inserted...
1Press the TAPE 23 button twice to change the tape direction to 3 (forward direction).
2Press the 7 STOP button.
3Change the mode to CD by pressing the CD 3/8 button.
(If a
When
1Press the CD 3/8 button twice. The CD player enters the pause mode.
2Press the ONE TOUCH REC button to start recording.
Note:
ÖDepending on the CD used,
To record one track...
Play the track to be recorded. Then, press the ONE TOUCH REC button to locate the beginning of the track and enter the one track recording mode. After the recording is finished, the CD player and cassette deck both stop.
To record only on side B or in the middle of a tape...
1Load the cassette with the required side facing out.
2Set the reverse mode to 
with the remote control unit.
3Press the ONE TOUCH REC button on the main unit.
Synchronized recording starts and the cassette deck stops automatically when CD playback is completed.
How to rewind a tape
1Press the TAPE 23button (to set to TAPE mode).
2Press the 7 STOP button.
3Press the 4 (REW) button.
20
