JVC RV-B55 BU, RV-B55 LTD, RV-B55 GY BEAT CUT button, Erasing, Operate in the order shown, Volume

Recording from the radio or an external source connected to the AUX IN terminals

Operate in the order shown

4		2			1
					DOWN
ON/STANDBY					VOLUME
AHB PRO	ACS	SOUND			BAND
			C D	TAPE	TUNER
PRESET		ONE TOUCH
AUX	TUNING	REC	MULTI CONTROL
					AUX
BEAT CUT		STANDBY AHB PRO	ACS
			REW	STOP	FF
					REVERSE MODE
					3
		OPEN			DISPLAY

UP

C D

REW

SLEEP

SET

PROGRAM

RANDOM

AUTO

PRESET REPEAT

TUNER

TAPE BAND

FM MODE

MULTI CONTROL FF

SOUND ACS

1Load a cassette with side A facing out.

(Wind past the tape leader before starting recording.)

Ö Make sure the tape direction is set to 3 (forward direction).

2Select the source to be recorded.

TUNER: Press the TUNER BAND/FM MODE button. Tune to the required station.

AUX: Press the AUX button.

3Select the desired reverse mode.

4Press the ONE TOUCH REC button.

Ö The recording starts from the beginning of side A.

BEAT CUT button

When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. In such case, set this button after setting the deck to the record mode so that the beats are eliminated. Normally set this button to "CUT-1".

PRESET

TUNING

BEAT CUT

AHB PRO

VOLUME

Erasing

A recorded tape can be erased by recording new material over the previous material.

To erase a tape without making a new recording.....

1.Press the TAPE 23 button to set to the TAPE mode.

2.Insert the cassette to be erased facing out.

3.Press the ONE TOUCH REC button.

It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic work embodied therein.

21