19
Use the sleep timer to turn the system off after a certain number of
minutes when it is playing. By setting the sleep timer, you can fall
asleep to the music and know that your system will turn off by
itself rather than playing all night.
■
You can set the sleep timer only when the system is turned on.
■
1.Press SLEEP.
The SLEEP indicator lights up on the display.
■
2.Set the length of time you want the source
to play before shutting off.
Each time you press the button, it changes the number of
minutes shown on the display in this sequence:
10
=
20
=
30
=
60
=
90
=
120
=
OFF
=
(back to the
beginning)
After setting the number of minutes for the sleep timer, the
indication will stop flashing and go off.
The system is now set to turn off after the number of minutes you
set.
To confirm the sleep time:
When SLEEP is pressed, the remaining sleep time is displayed.
Wait until the display returns to the original display.
To cancel the sleep timer:
Press SLEEP repeatedly to select “OFF.” Turning off the system
also cancels the sleep timer.
Once the timer has been set, it will be activated at the same time
everyday until the timer is turned off. Recording timer works only
one time.
• While the timer is being set, the timer indicator ( ) lights up.
•While the timer has been set, the timer indicator ( ) also lights
up if the power is supplied through the AC outlet.
• While the timer is working, the timer indicator ( ) flashes.
■
1.Press ON/STANDBY.
■
2.Press CLOCK/TIMER.
“TIMER ON?” appears.
• Press SET to activate the timer setting you have made before.
• Press CANCEL to cancel the timer.
• Go to the next step to set the timer first time (or reset the
timer).
■
3.Press CLOCK/TIMER again, so that the timer indicator ( ) and ON indicator light
up.
The hour digit of the current ON time flashes on the display.
■
4.Set the on-time you want the system to
turn on.
(1) Press ¢
or 4
to select the hour, then press SET.
(2) Press ¢
or 4
to select the minute, then press SET.
The OFF indicator lights up.
• Press and hold the button to change the time rapidly.
• If you want to change the time setting, press CANCEL.
■
5.Set the OFF time (example: PM1:30).
(1) Press ¢
or 4
to select the hour, then press SET.
(2) Press ¢
or 4
to select the minute, then press SET.
• Press and hold the button to change the time rapidly.
• If you want to change the time setting, press CANCEL.
■
6.Press ¢
or 4
to select the music source
you want to listen to, then press SET.
Each time you press the button, the display changes as shown
below:
TUNER
=
TU\
TAPE
=
CD
=
TAPE
=
(back to the
beginning)
When you select the “TU\
TAPE”;
• The REC indicator appears on the display.
• The timer will be canceled after tuner recording has been
finished.
■
7.Press ¢
or 4
to select the volume level,
then press SET.
– –: The current volume level will be used.
0 to 50:When the timer is turned on, the volume will be
automatically set to the selected level.
• The current timer setting appears for confirmation.
Setting the sleep timer
Using the remote control only
Setting the daily timer
Using the remote control only
EN07-20_RV-NB10[J]2.fm Page 19 Thursday, January 12, 2006 2:27 PM