Main
INSTRUCTIONS
LVT1539-001A
RV-NB10B/RV-NB10W
For Canada/pour le Canada
Mises en garde, prcautions et indications diverses
IMPORTANT POUR PRODUITS LASER
Page
Page
Page
Using the remote control RM-SRVNB10J
(See page 18.)
Connecting the auxiliary equipment (See page 17.)
Page
Page
Page
1.Press WIRELESS/FM/AM repeatedly to select either FM or AM.
2.Select a station using one of the following
1.Select a band (either AM or FM) by pressing WIRELESS/FM/AM repeatedly.
to tune in to a station.
or
4.Press the number buttons to select the
6.Repeat above steps to for each station you want to store into memory with
1.Turn the LOCK/RELEASE knob counterclockwise to open the disc
Page
Page
Page
Page
Page
3.Turn on the wireless transmitter.
Transmitting sound on FM wave
Installing the batteries to the wireless transmitter
Connecting to the AUX IN jack
3.Adjust the volume to the desired listening
Presetting frequencies
Microphone/guitar mixing Recording microphone or
2.Set the length of time you want the source
3.Press CLOCK/TIMER again, so that the timer indicator ( ) and ON indicator light
or 4
5.Set the OFF time (example: PM1:30).
4.Set the on-time you want the system to
8.Before turning off the system, prepare the music source selected in step on page 19.
9.Press ON/STANDBY to turn off the
Page
22
(VFT-001)
Wireless Transmitter
6 W per channel, min. RMS, at 4
Page
Page
Page
INSTRUCTIONS
POWERED WOOFER CD SYSTEM
RV-NB10B/RV-NB10W
For Canada/pour le Canada
Mises en garde, prcautions et indications diverses
IMPORTANT POUR PRODUITS LASER
Page
Page
Page
Using the remote control RM-SRVNB10J
(See page 18.)
Connecting the auxiliary equipment (See page 17.)
Page
Page
Page
1.Press WIRELESS/FM/AM repeatedly to select either FM or AM.
2.Select a station using one of the following
1.Select a band (either AM or FM) by pressing WIRELESS/FM/AM repeatedly.
to tune in to a station.
or
4.Press the number buttons to select the
6.Repeat above steps to for each station you want to store into memory with
1.Turn the LOCK/RELEASE knob counterclockwise to open the disc
Page
Page
Page
Page
Page
3.Turn on the wireless transmitter.
Transmitting sound on FM wave
Installing the batteries to the wireless transmitter
1.Connect the wireless transmitter to the headphones jack of auxiliary equipment.
Connecting to the AUX IN jack
3.Adjust the volume to the desired listening
Presetting frequencies
Microphone/guitar mixing Recording microphone or
2.Set the length of time you want the source
3.Press CLOCK/TIMER again, so that the timer indicator ( ) and ON indicator light
or 4
5.Set the OFF time (example: PM1:30).
4.Set the on-time you want the system to
8.Before turning off the system, prepare the music source selected in step on page 19.
9.Press ON/STANDBY to turn off the
Page
22
(VFT-001)
Wireless Transmitter
6 W per channel, min. RMS, at 4
at 60 Hz with no more than 10% total harmonic distortion.
Page
Page
Caution: Proper Ventilation
SAFETY INSTRUCTIONS SOME DOS AND DONTS ON THE SAFE USE OF EQUIPMENT
Information for Users on Disposal of Old Equipment
Page
Page
Page
Using the remote control RM-SRVNB10E
16.)
Connecting the auxiliary equipment (See page 16.)
Page
Page
Page
1.Press TUNER BAND.
2.Select a station using one of the following
1.Select a band (either AM or FM) by pressing TUNER BAND.
to tune in to a station.
or
4.Press the number buttons to select the
Page
Page
Page
Page
Page
2.Press AUX (D PLAYER).
3.Adjust the volume to the desired listening
1.Make sure the MIC/GUITAR LEVEL control
2.Set the MIC/GUITAR LEVEL control to MIN
Microphone/guitar mixing Recording microphone or
Page
3.Press CLOCK/TIMER again, so that the timer indicator ( ) and ON indicator light
or 4
4.Set the on-time you want the system to
5.Set the OFF time (example: 1:30).
to select the music source
