13
■■
Playing back tapes
With automatic tape direction, you can listen to type I or II tapes
without having to change any settings.
■
1.Turn the LOCK/RELEASE knob
counterclockwise to open the cassette
holder.
■
2.Put the cassette in, with the side you want
to listen to facing you.
■
3.Close the holder gently and turn the knob
to “LOCK” position.
■
4.Press TAPE 2
3
.
The tape is played in the direction shown by the tape direction
indicator.
3
(Forward playback):
The side of the tape facing you is
played back.
2
(Reverse playback):
The opposite side of the tape is
played back.
■
5.If you need to change the playback
direction, press TAPE 2
3
.
The opposite side tape direction indicator lights up and the tape
playback direction changes.
To stop playing,
press 7
.
To remove the tape,
stop the tape, and open the cassette
holder by turning the LOCK/RELEASE knob to the
“RELEASE” position.
Notes:
• Do not turn the LOCK/RELEASE knob during playback.
• When no tape is loaded in the deck, “NO TAPE” appears on the
display.
Press ¢
or 4
to fast-wind/rewind the tape.
• The cassette deck automatically stops when the tape reaches its
end.
You can set a tape to play just one side, both sides in succession, or
both sides continuously.
Press REVERSE MODE.
Each time you press the button, reverse mode indicator changes as
follows:
== =
(back to the beginning)
•:The cassette deck automatically stops after playing one
side of the tape.
•:The cassette deck automatically stops when playback
in the reverse (2
) direction is finished.
•:The cassette deck continues to play both sides of the
tape until the 7
button is pressed.
7
4
¢
TAPE 2 3
7
4¢
TAPE 2 3
REVERSE
MODE LOCK/RELEASE
knob
The use of tapes longer than 120 minutes is not recommended,
since characteristic deterioration may occur and these tapes easily
jam in the pinch-rollers and the capstans.
Regular play
To fast-wind/rewind a tape
Reverse mode
Using the remote control only
RV-NB10[B].book Page 13 Friday, January 20, 2006 7:58PM