12
���
You can program up to 50 tracks in any desired order including
the same tracks.
■
You can only make a program when the system is stopped.
■
While making a program, you cannot specify a group number to
select a track.
■
1.Set a disc.
■
2.Press CD 6
.
■
3.Press 7
to stop the disc.
■
4.Press PLAY MODE repeatedly to select
“PROGRAM.”
The system enters the programming mode and the PRGM
indicator lights up.
■
5.Press the number buttons to select the
track to program.
•For detailed operations, see “To locate a track directly” on
page 11.
Example:
For track 7, press 7.
*Total playback time will not appear while making a
program using an MP3 disc.
■
6.Repeat step to select other tracks for
the program.
•To cancel the last track programmed, press CANCEL once.
■
7.Press CD 6
.
The system plays the tracks in the order you have programmed
them.
■
You can skip to a particular program track by pressing4
or
¢
during program play.
While stopped:
■
To confirm the programmed tracks,
press 4
or ¢
repeatedly; the tracks making up the program will successively
be displayed in the programmed order.
•To add a track to the end of the program, simply press the
number buttons.
■
To delete the tracks in the program,
press CANCEL
repeatedly. Each time you press the button, the last track will be
erased.
■
To delete the entire program,
press and hold CANCEL
until “CLEAR!” appears on the display.
•Turning off the power will clear the program.
■
To exit from program mode,
press PLAY MODE
repeatedly until the track number and total playback time
appear on the display.
Each time you press the button, the play mode changes as
follows:
Normal play =
PROGRAM
=
RANDOM
=
(back to the
beginning)
Note:
(For CDs) If the total playback time of the programmed tracks
exceeds 99 minutes 59 seconds, “– – : – –” will appear on the
display.
The tracks will play in no special order when you use this mode.
■
1.Set a disc.
■
2.Press CD 6
.
■
3.Press 7
to stop the disc.
■
4.Press PLAY MODE repeatedly to select
“RANDOM.”
The RANDOM indicator lights up on the display.
■
5.Press CD 6
.
The tracks are played in random order once.
To skip a track during playback,
press ¢
to skip to another
track in the random sequence. The 4
button works only to go
back to the beginning of the current track.
While stopped:
■
To exit from random mode,
press PLAY MODE repeatedly
until the track number and total playback time appear on the
display.
Each time you press the button, the play mode changes as
follows:
Normal play =
PROGRAM
=
RANDOM
=
(back to the
beginning)
You can repeat the tracks or individual track as many times as you
like.
Press REPEAT.
Each time you press the button, repeat indicator changes as
follows:
For CDs:
ALL =
=
canceled =
(back to the beginning)
•
ALL:
Repeats all the tracks on the disc.
•
:
Repeats the current track.
For MP3 discs:
ALL
=
GROUP=
=
canceled =
(back to the
beginning)
•
ALL:
Repeats all the tracks on the disc.
•
GROUP:
In normal play mode, repeats all the tracks in
a group.
In program and random play modes, group
repeat cannot be selected.
•
:
Repeats the current track.
■Repeat mode (except “ GROUP”) remains in effect even
when you change the play mode.
To exit from repeat mode, press REPEAT until the repeat
indicator on the display goes out.
Programming the playing order
of the tracks
Using the remote control only
(After 2 seconds)
Program order number
Total playback time of the programmed tracks*
Last programmed track
Random play
Using the remote control only
Repeating tracks
Using the remote control only
RV-NB10[B].book Page 12 Friday, January 20, 2006 7:58PM