JVC RX-6040B Operating Other Manufacturers’ Video Equipment, 1Set the TV/CATV selector to “TV.”

Operating Other Manufacturers’ Video Equipment

This remote control supplied for the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, VCRs and DVD players.

When operating the other manufacturers’ components, refer also to the manuals supplied with them.

•After replacing batteries for the remote control, you need to set the manufactures’ codes again.

To change the transmittable signals for operating another manufacturer’s TV

1Set the TV/CATV selector to “TV.”

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer	Codes
JVC	01*
Hitachi	10
Magnavox	02
Mitsubishi	03
Panasonic	04, 11
RCA	05
Samsung	12
Sanyo	13
Sharp	06
Sony	07
Toshiba	08
Zenith	09

* “01” is the initial setting.

5 Release STANDBY/ON TV/CATV.

Now you can perform the following operations on the TV:

STANDBY/ON TV/CATV: Turn on and off the TV.

TV/CATV CH +/–:Change the channels.

TV VOLUME +/–:Adjust the volume.

TV/VIDEO: Set the input mode (either TV or VIDEO).

After pressing TV SOUND, you can perform the following operations on the TV:

1 – 9, 0, 100+ (+10):

Select the channels.

The 10 (ENTER) button will function as the

ENTER button if your TV requires pressing

ENTER after selecting a channel number.

Notes:

•All the functions listed above may not be assigned to the buttons for some TVs.

•If you cannot change the channels of some TVs by pressing the 10 keys, press TV/CATV CH +/– for changing the channels.

To change the transmittable signals for operating a CATV converter

1Set the TV/CATV selector to “CATV.”

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer	Codes
Echostar	01*
General Instrument	02, 03, 04, 05, 06, 07, 08, 09
Hamlin	16, 17, 18, 19
Pioneer	14, 15
RCA	20
Scient	10, 11
Sony	21
Zenith	12, 13

* “01” is the initial setting.

5 Release STANDBY/ON TV/CATV.

Now you can perform the following operations on the CATV converter:

STANDBY/ON TV/CATV:

Turn on and off the CATV converter.

TV/CATV CH +/–:Change the channels.

After pressing TV SOUND, you can perform the following operations on the CATV converter:

1 – 9, 0, 100+ (+10):

Select the channels.

The 10 (ENTER) button will function as the ENTER button if your CATV converter requires pressing ENTER after selecting a channel number.

6 Try to operate your CATV converter by pressing

STANDBY/ON TV/CATV.

When your CATV converter on or off, you have entered the correct code.

If there are more than one code listed for your brand of CATV converter, try each one until the correct one is entered.

6 Try to operate your TV by pressing

STANDBY/ON TV/CATV.

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

35