JVC RX-5040B, RX-6042S, RX-6040B manual Basic Procedure

Basic Setting Items

On the following pages, you can adjust the following items:

•You can only select the items currently available. For details, see the explanation of each item.

Items	To do	See page
SUBWOOFER*1	Register your subwoofer.		20
FRNT SPEAKERS*1	Register your front speaker size.		20
CNTR SPEAKER*1	Register your center speaker size.		20
SURR SPEAKERS*1	Register your surround speaker size.		20
DISTANCE UNIT	Select the measuring unit for the
	speaker distance.		20
FRONT L DIST*1	Register the distance from the left front
	speaker to your listening point.		20
FRONT R DIST*1	Register the distance from the right front
	speaker to your listening point.		20
CENTER DIST*1	Register the distance from the center
	speaker to your listening point.		20
SURR L DIST*1	Register the distance from the left
	surround speaker to your listening
	point.		20
SURR R DIST*1	Register the distance from the right
	surround speaker to your listening
	point.		20
SUBWOOFER OUT Select the type of the sounds emitted from
	the subwoofer.		20
CROSSOVER	Select the cutoff frequency to the
	subwoofer.		21
LFE ATTENUATE	Attenuate the bass (LFE) sounds.		21
MIDNIGHT MODE	Reproduce a powerful sound at night.		21
DUAL MONO	Select the Dual Mono sound channel.		21
AUTO SURROUND	Turn on or off Auto Surround.		21
VIRTUAL SBACK	Turn on or off Virtual Surround Back.		22
DIGITAL IN	Select the component connected to
	digital input terminal.		22
VIDEO IN DVD*2	Select the type of video terminal
	used for the DVD player.		22
VIDEO IN VCR*2	Select the type of video terminal
	used for the VCR.		22

Notes:

*1 These items can be set using Quick Speaker Setup. *2 This setting is only for RX-6040B/RX-6042S.

Basic Procedure	Remote
	NOT

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex. When setting Auto Surround to “AUTO SURR ON.”

1 Press SETTING.

The last selected item appears on the display.

2Turn MULTI JOG until an item you want appears on the display.

•In this example, select “AUTO SURROUND.” For available items, see the list “Basic Setting Items.”

3Press in MULTI JOG (PUSH SET).

The current setting for the selected item appears on the display.

4Turn MULTI JOG until a setting you want appears on the display.

5Press in MULTI JOG (PUSH SET).

6Repeat steps 2 to 5 to set other items if necessary.

7Press EXIT.

The source indication resumes on the display.

English

19