JVC RX-5040B manual Getting Started, Connecting the Speakers and Subwoofer, AM antenna connections

Getting Started

AM antenna connections

Connecting the speakers For RX-6040B/RX-6042S

AM

EXT

AM

LOOP

FM 75

COAXIAL

ANTENNA

AM Loop Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

1	2		3		4
			LEFT			LEFT
	RIGHT	+	RIGHT	+	RIGHT	+
		–		–		–

For RX-5040B/RX-5042S/RX-5045B

1	2		3	4
		LEFT	LEFT		LEFT
	RIGHT	+	+	RIGHT	+
		–	–		–

1 2 3

For each speaker (except for a subwoofer), connect the (+) and

(–) terminals on the rear panel to the (+) and (–) terminals marked on the speakers.

Outdoor single vinyl-covered wire (not supplied)

Turn the loop until you have the best reception.

Notes:

• If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as illustrated.

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception.

•If reception is poor, connect an outdoor single vinyl-covered wire (not supplied) to the AM EXT terminal. (Keep the AM loop antenna connected.)

Connecting the Speakers and Subwoofer

You can connect five speakers (a pair of front speakers, a center speaker, and a pair of surround speakers) and a subwoofer.

CAUTIONS:

•Use only the speakers of the SPEAKER IMPEDANCE indicated by the speaker terminals.

•Do not connect more than one speaker to each speaker terminal.

For RX-6040B/RX-6042S

						:	IMPEDANCE
						CAUTION
						SPEAKER16
			FRONT			8
		SPEAKERS		+
SURROUND		+		–
	+
SPEAKERS
CENTER		–
SPEAKER	–							To left
+
								front speaker
–
To center speaker								To left surround
								speaker
To right front speaker
To right surround speaker
For RX-5040B/RX-5042S/RX-5045B
					:	IMPEDANCE
				CAUTION
				SPEAKER16
				8
	FRONT
SURROUND	SPEAKERS		+
CENTER			–
+								To left
–								front speaker
								To left surround
To center speaker								speaker
To right front speaker
To right surround speaker

6