Adjusting the 3D-PHONIC Modes

IMPORTANT:

When using the remote control, check to see if its

remote control mode selector is set to the correct	AUDIO/
remote control mode selector is set to the correct	TV/VCR
position:
position:
To operate this receiver, set it to “AUDIO/TV/	CATV/DBS
	CATV/DBS

VCR.”

Once you have adjusted the 3D-PHONIC modes, the adjustment is memorized for each 3D-PHONIC mode.

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 14).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:
1. Press DSP MODE repeatedly until	DSP MODE
“3D ACTION” or “3D

THEATER” appears on the display.

The 3D-PHONIC, DSP, and ÙPRO LOGIC indicators also light up on the display.

3. Press EFFECT to select an effect	EFFECT
level you want.	7/P

•Each time you press the button, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, the selected 3D-PHONIC mode becomes stronger.

Adjusting the DAP Modes

Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 14).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You cannot adjust the rear speaker output level when you have set “REAR SPK” to “NONE.” See page 14.

•When the DAP mode is used with the SEA mode (see page 20), sounds may be distorted. If this happens, turn off the SEA mode.

On the front panel:

2.Adjust the effect level.

1)Press BALANCE/SURROUND ADJUST repeatedly until “DSP EFFECT” appears on the display. The display changes to show the current setting.

2)Turn MULTI JOG to select the effect level.

•As you turn it, the effect level changes as follows:

BALANCE/SURROUND

ADJUST

MULTI JOG

1. Press DSP MODE repeatedly until	DSP MODE
1. Press DSP MODE repeatedly until
the DAP mode — LIVE CLUB,
DANCE CLUB, HALL, or
PAVILION — appears on the
display.

The DSP indicator also lights up on the display.

•When you have set “REAR SPK” to “NONE,” the 3D- PHONIC indicator also lights up.

2. Adjust the speaker output levels.

BALANCE/SURROUND

DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5	DSP EFFECT 4
As the number increases, the selected 3D-PHONIC mode
becomes stronger.
From the remote control:
1. Press SURROUND MODE		SURROUND
repeatedly until “3D ACTION” or		MODE
repeatedly until “3D ACTION” or

“3D THEATER” appears on the display.

The 3D-PHONIC, DSP, and ÙPRO LOGIC indicators also light up on the display.

1)	Press BALANCE/SURROUND
	ADJUST repeatedly until one of the
	indications appears on the display.
	“REAR L LEVEL”:
	To adjust the left rear speaker level.
	“REAR R LEVEL”:
	To adjust the right rear speaker level.
2)	Turn MULTI JOG to adjust the
	selected speaker output level (from –10
	dB to +10 dB).
3)	Repeat 1) and 2) to adjust the other
	speaker output level.

ADJUST

MULTI JOG

2. Press SOUND.

SOUND

The 10 keys are activated for sound adjustments.

RX-7000VBK specifications

The JVC RX-7000VBK is a powerful and versatile receiver that stands out in the realm of home audio systems. Designed for audiophiles and casual listeners alike, it seamlessly integrates various technologies to enhance the listening experience. With its sleek, modern design, the RX-7000VBK fits into any home decor while delivering exceptional sound quality.

One of the notable features of the RX-7000VBK is its robust amplification system. The receiver boasts a power output of 100 watts per channel across multiple channels, ensuring that it can drive a variety of speakers with ease. This makes it an ideal choice for both small and large living spaces. Additionally, the receiver supports up to 7.1 channels, providing an immersive surround sound experience that brings movies, music, and games to life.

The RX-7000VBK is equipped with advanced audio technologies that deliver high-fidelity sound. It features multi-channel digital signal processing (DSP) that optimizes audio quality by analyzing the sound and enhancing it according to the type of content being played. This results in crystal-clear dialogues, deep bass, and a balanced overall soundstage.

Connectivity is another highlight of the JVC RX-7000VBK. The receiver comes with multiple HDMI inputs, allowing users to connect several devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K pass-through, ensuring that users can enjoy the latest video content in stunning detail. Additionally, there are standard audio inputs, including optical and coaxial digital inputs, for versatile connectivity with other devices.

In terms of user experience, the RX-7000VBK features an intuitive on-screen menu that simplifies setup and operation. The included remote control provides convenient access to all functions, including a dedicated button for direct sound mode selection, allowing users to switch between different sound presets easily.

Lastly, the JVC RX-7000VBK is designed with durability in mind. It is built with high-quality components that ensure longevity while delivering reliable performance over time. Overall, the JVC RX-7000VBK is an excellent choice for anyone seeking a high-quality AV receiver that combines powerful sound, ample connectivity, and user-friendly features in one sophisticated package.

JVC RX-7000VBK manual Adjusting the 3D-PHONIC Modes, Adjusting the DAP Modes

Models: RX-7000VBK