For the other DSP modes
On the front panel: |
|
1. Press DSP MODE repeatedly until | DSP MODE |
the mode you want appears on the |
|
display. |
|
•Each time you press the button, the DSP modes change. (See page 23 for more details.)
2.Select and play a sound source.
•To enjoy
software encoded with Dolby Surround and labeled with mark.
To cancel the DSP mode | DSP MODE |
Press DSP MODE repeatedly until “DSP OFF” |
|
appears on the display. |
|
From the remote control: |
|
1. Press SURROUND MODE | SURROUND |
repeatedly until the DSP mode you | MODE |
|
want appears on the display.
•Each time you press the button, the DSP modes change.
2.Select and play a sound source.
•To enjoy
software encoded with Dolby Surround and labeled with mark.
To cancel the DSP mode | SURROUND |
| |
Press SURROUND MODE repeatedly until | MODE |
“DSP OFF” appears on the display. |
|
Note:
While playing back MPEG Multichannel or Dolby Digital source through a digital input terminal, you can neither select nor adjust any DSP mode. If any DSP mode is in use, it is temporarily canceled, and normal stereo sounds are reproduced.
To enjoy the MPEG Multichannel and Dolby Digital source with DSP mode, change the input mode from the digital input to the analog input. (See page 16.)
––––––––––––––– MEMO ––––––––––English
Use this column to write down your DSP mode adjustments for your future reference.
28