English
4. Press %/ Þto move 
to “SEA ADJUST.”
The SEA ADJUST menu appears.
5. Press %/ Þ/ @/ #to adjust the SEA mode as you want.
@/ # : Select the frequency ranges.
%/ Þ: Adjust the frequency levels.
6.Press SET to store the setting into the SEA USERMODE.
•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)
7.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Setting the Basic Setting Items (Also see
pages 14 – 17)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ / @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move 
to “SETTING,” then press @/ #.
“LFE ATT.”: | Set the low frequency effect attenuator |
| level (see page 15). |
“COMP.”: | Set the dynamic range compression |
| (see page 15). |
“DIGITAL 1/2/3”: | Set the digital input terminals |
| (see page 16). |
“FL DISP.”: | Shows the disc text information on the |
| display (see page 17). |
Notes:
*Not adjustable when “CENTER SPK” is set to “NONE” (see page 14).
**Not adjustable when “REAR SPK” is set to “NONE” (see page 14).
4.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Operating the Tuner (Also see pages 18 and 19)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the % / Þ / @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move 
to “TUNER |
|
CONTROL,” then |
|
press @/ #. | |
The TUNER CONTROL menu |
|
appears. |
|
The SETTING 1 or SETTING 2 menu appears.
3.Press %/ Þto move 
to the item you want to set or adjust, then press
@/ #.
•To go to the SETTING 2
menu, move 
to “NEXT PAGE,” then press @/ #.
•To go back to the SETTING
1 menu, move 
to “PREVIOUS PAGE,” then press @/ #.
3. Press %/ Þto move 
to the item you want to set or adjust, then press @/ #.
On the TUNER CONTROL menu, you can do the following:
“PRESET CH”: | Select a preset channel station. |
“BAND”: | Select the band. |
“FREQUENCY”: | Tune in a station manually. |
“FM MODE”: | Select the FM reception mode.* |
“PRESET MEMORY”: See “Storing the Preset Stations” on the next page.
Note:
* Not displayed when an AM station is selected. |
4. When you finish, press EXIT repeatedly until the |
On the SETTING 1 and 2 menus, you can do the following:
“SUBWOOFER”: | Set the subwoofer information (see |
| page 14). |
“FRONT SPK”: | Set the front speaker information (see |
| page 14). |
“CENTER SPK”: | Set the center speaker information (see |
| page 14). |
“REAR SPK”: | Set the rear speaker information (see |
| page 14). |
“CNTR DELAY”: | Adjust the delay time of the center |
| speaker output (see page 14).* |
“REAR DELAY”: | Adjust the delay time of the rear |
| speaker output (see page 14).** |
“CROSSOVER”: | Set the crossover frequency |
| (see page 15). |
menu disappears from the TV. |
33
