JVC RX-D201S Basic operations, Turn on the power, Select the source to play, On the front panel

Basic operations

1			2	3
		Source lamps
1	2	3	1
4	5	6
7	8	9
10	0	10
			2
			3

1 Turn on the power

Press STANDBY/ON (or STANDBY/ON AUDIO on the remote control).

The standby lamp goes off and the source lamp of the current

source lights in red.

Current source name appears.

ANALOG AUTO SURR TUNED STEREO AUTO MUTING

L R

2 Select the source to play

On the front panel:

Turn SOURCE SELECTOR until the source name you want appears on the display.

The source lamp corresponding to the selected source lights in

red.

•As you turn SOURCE SELECTOR, the source changes as follows:

ANALOG AUTO SURR TUNED STEREO AUTO MUTING

LR

S.WFR

MHz

DVR/DVD (DGTL) VCR (DIGITAL)

DBS (DIGITAL)TV (DIGITAL)

USB DIGITAL FM AM

(Back to the beginning)

DVR/DVD (DGTL)*: Select the DVD recorder or DVD player.

VCR (DIGITAL)*:	Select the VCR.
DBS (DIGITAL)*:	Select the DBS tuner.
TV (DIGITAL)*:	Select the TV.
USB DIGITAL:	Select the PC component.
FM:	Select an FM broadcast.
AM:	Select an AM broadcast.

From the remote control:

Press one of the source selecting buttons.

•For the tuner, press FM/AM. Each time you press FM/AM, the band alternates between FM and AM.

* Selecting the analog or digital input mode

For a component you have connected using both the analog connection and the digital connection methods (see pages 7 to 10), you need to select the correct input mode.

•You can select the digital input only for sources which you have selected digital input terminals for. (See “Setting the digital input (DIGITAL IN) terminals—DIGITAL IN 1/2” on page 20.)

•“DGTL AUTO” and “ANALOG” setting are memorized for each source.

From the remote control ONLY:

Press ANALOG/DIGITAL to select the analog or digital input mode.

•Each time you press the button, the input mode changes as follows:

AUTO SURR

DIGITAL AUTO L C R

S.WFR

DIGITAL

S.WFR LFE

MHz

LS RS

To turn off the power (into standby)

Press STANDBY/ON (or STANDBY/ON AUDIO on the remote control) again.

The standby lamp lights in red.

NOTE

A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.

DGTL AUTO DOLBY DIGITAL

DTS ANALOG (Back to the beginning)

12