❏Changing the transmittable signals for operating a CATV converter or DBS tuner
1Press and hold STANDBY/ON TV/DBS/ CATV.
2Press DBS.
3Enter the manufacturer’s code using buttons 1 – 9, and 0.
See “Manufacturers’ codes for CATV converter/DBS tuner”
below.
4Release STANDBY/ON TV/DBS/CATV.
After pressing DBS, you can perform the following operations on the CATV converter or DBS tuner.
STANDBY/ON | Turn on or off the CATV converter |
TV/DBS/CATV: | or DBS tuner. |
|
|
CHANNEL
1 – 9, 0:Select the channel numbers on the CATV converter or DBS tuner.
See the instructions supplied with the CATV converter or DBS tuner for details.
5After pressing DBS, try to operate your CATV converter or DBS tuner by pressing
STANDBY/ON TV/DBS/CATV.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If more than one code is listed for your brand of CATV
converter or DBS tuner, try each one until the correct one is entered.
❏Changing the transmittable signals for operating a DVD player
1Set the mode selector to “DVD.”
2Press and hold STANDBY/ON DVR/DVD.
3Press DVR/DVD.
4Enter the manufacturer’s code using buttons 1 – 9, and 0.
See “Manufacturers’ codes for DVD player” below.
5Release STANDBY/ON DVR/DVD.
Now, you can perform the following operation on the DVD player.
STANDBY/ON | Turn on or off the DVD player. |
DVR/DVD: |
|
|
|
3: | Start playback. |
|
|
4: | Return to the beginning of the current |
| chapter (or |
| models). |
|
|
¢: | Skip to the beginning of the next chapter |
| (or |
|
|
7: | Stop playback. |
|
|
8: | Pause playback. |
|
|
MENU: | Display the menu recorded on DVD |
| VIDEO discs. |
|
|
5/∞/3/2: | Select an item on the menu screen. |
|
|
ENTER: | Enter the selected item. |
|
|
1 – 9, 0: | Select the chapter number. |
|
|
See the instructions supplied with the DVD player for details.
Manufacturers’ codes for CATV converter/ DBS tuner
Manufacturer | Codes |
|
|
Echostar (JVC) | 01 |
G.I. | 02, 03 |
Hamlin | 10 – 13 |
Pioneer | 08, 09 |
RCA | 14 |
Scient | 04, 05 |
Sony | 15 |
Zenith | 06, 07 |
Initial setting: 01
6Try to operate your DVD player by pressing
STANDBY/ON DVR/DVD.
When your DVD player turns on or off, you have entered the
correct code.
Manufacturers’ codes for DVD player
Manufacturer | Codes |
|
|
JVC | 01 |
Panasonic | 02 |
Philips | 04 |
Pioneer | 03 |
Sony | 05 |
Toshiba | 06 |
Yamaha | 07 |
|
|
Initial setting: 01
NOTE
You cannot use this remote control to operate other manufacturers’ DVD recorder.
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
38