Setting the speakers, On the front panel only

Press SETTING.

The source indication resumes on the display.

Your setting is stored.

5 Press SET.

6 Repeat steps 2 to 5 to set other items if necessary.

Operating procedure		Setting the speakers
1,7	3,5 2,4	To obtain the best possible surround effect from the Surround and
		DSP modes, register the setting about the speaker after all
		connections are completed.
		• If you have used Quick Speaker Setup on page 15, this setting
		is not required.

On the front panel ONLY:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex.: When setting DIGITAL IN 1 terminal.

1Press SETTING.

MULTI JOG now works for the setting operation.

2Turn MULTI JOG until the item you want to set appears on the display.

•As you turn MULTI JOG, the setting items change as follows:

ANALOG

S.WFR

Setting subwoofer information—SUBWOOFER

Select whether you have connected a subwoofer or not.

SUBWFR <YES> Select when you have connected a

subwoofer.

The subwoofer indicator ( S.WFR ) lights up on the display. You can adjust the subwoofer output level (see page 22).

SUBWFR <NO> Select when you have disconnected a subwoofer. Selecting this changes the front speaker size to “LRG” (see below).

Initial setting: SUBWFR <NO>

Setting the speaker size—FRONT SPK (front speakers), CENTER SPK (center speaker), SURROUND SPK (surround speakers), S BACK SPK (surround back speakers)

QUICK SPK SET FRONT SPK SURROUND SPK S BACK OUT FRONT L DIST CENTER DIST SURR R DIST S BACK L DIST EX/ES/PLIIx

SUBWOOFER OUT LFE ATT DIGITAL IN 1 DVD VIDEO IN DBS VIDEO IN

SUBWOOFER CENTER SPK S BACK SPK DIST UNIT FRONT R DIST SURR L DIST S BACK DIST S BACK R DIST DUAL MONO CROSSOVER MIDNIGHT MODE DIGITAL IN 2 VCR VIDEO IN

(Back to the beginning)

<LRG> (large)	Select when the cone speaker size is
	larger than 12 cm (4 3/4 inches).
<SML> (small)	Select when the cone speaker size is
	smaller than 12 cm (4 3/4 inches).
<NO>	Select when you have disconnected a
	speaker. (Not selectable for the front
	speakers.)

Initial setting: <LRG> (for the front speakers) <SML> (for other speakers)

Setting the surround back speaker(s)—S BACK OUT

SB OUT <1SPK> Select when you use 1 surround back speaker.

3Press SET.

The current setting of the selected item appears.

ANALOG

S.WFR

4Turn MULTI JOG to select the appropriate

setting.

ANALOG

S.WFR

DVR/DVD DBS

TV VCR

SB OUT <2SPK> Select when you use 2 surround back speakers.

Initial setting: SB OUT <2SPK>

NOTES

•If you have selected “SML (small)” for the front speaker size, you cannot select “LRG (large)” for other speakers.

•When “SUBWOOFER” is set to “SUBWFR <NO>,” the front speaker size is fixed to “LRG” (and you cannot select “SML”).

•When “SURROUND SPK” is set to “SML (small),” you cannot select “LRG (large)” for the surround back speaker.

•When “SURROUND SPK” is set to “NO,” the surround back speaker is fixed to “NO.”

•When “S BACK SPK” is set to “NO,” you cannot select “S BACK OUT.”

•When “SB OUT” is set to “<1SPK>,” connect the surround back speaker to the left surround back speaker terminal (see page 6). No sound comes from the surround back speaker if you connect it to the right surround back speaker terminal.

RX-D202B, RX-D201S specifications

The JVC RX-D201S and RX-D202B are two high-performance stereo receivers that cater to the needs of audiophiles and casual listeners alike. These models are designed to deliver an immersive audio experience with a range of features and technologies that enhance sound quality and usability.

One of the standout features of the JVC RX-D201S and RX-D202B is their impressive power output. Both models deliver solid amplification, ensuring that even the most demanding speakers perform beautifully. The receivers offer a dynamic range that captures the nuances of your favorite music, whether you are listening to classical, rock, or electronic genres. With RMS power ratings that provide ample headroom, these receivers can fill a room with rich, detailed sound.

Connectivity is another key aspect of the RX-D201S and RX-D202B. The receivers come equipped with multiple input options, including HDMI, coaxial, optical digital inputs, and analog inputs, allowing users to connect a wide variety of audio and video devices, from Blu-ray players to gaming consoles. The inclusion of Bluetooth technology is a major advantage, enabling wireless streaming from smartphones and tablets. This feature provides added convenience for users who prefer to listen to music without the hassle of wired connections.

The receivers boast a user-friendly interface, making it easy for individuals of all technical backgrounds to navigate through settings and sources. The backlit remote control enhances usability, allowing users to manage their audio experience from across the room.

In terms of audio performance, both models are equipped with advanced sound processing technologies. They support various sound modes, allowing users to tailor the listening experience to their personal preferences. Features such as tone control and equalizer settings further enhance the versatility of the sound output.

The design of the JVC RX-D201S and RX-D202B is sleek and modern, with a minimalist aesthetic that fits well in any home entertainment setup. The built-in cooling system ensures consistent performance even during extended listening sessions, safeguarding the longevity of the unit.

In summary, the JVC RX-D201S and RX-D202B are superb choices for anyone seeking powerful, flexible, and user-friendly stereo receivers. With their robust features, impressive connectivity, and excellent audio quality, they stand out as reliable options in the competitive audio market. Users will find that these receivers excel in delivering a sophisticated listening experience that meets diverse musical tastes and preferences.

JVC RX-D202B, RX-D201S manual Setting the speakers, Setting subwoofer information-SUBWOOFER

Models: RX-D202B RX-D201S