JVC RX-D201S Connecting the speakers, Speaker Layout Diagram, Connecting the powered subwoofer

Models: RX-D202B RX-D201S

1 53
Download 53 pages 37.9 Kb
Page 8
Image 8
Connecting the speakers

Connecting the speakers

Do not connect the AC power plug to the wall outlet until all connections are completed.

Speaker Layout Diagram

SW

L

C

 

R

 

 

 

Center

LS

 

RS

speaker

 

(C)

 

 

 

SBL

(*SB)

SBR

 

SUBWOOFER

OUT

Right surround back speaker (SBR)

*Left surround back speaker (SBL)

SURROUND BACK

SURROUND

CENTER

FRONT

SPEAKERS

SPEAKERS

SPEAKER

SPEAKERS

RIGHT

LEFT

RIGHT

LEFT

RIGHT

LEFT

CAUTION:SPEAKER IMPEDANCE 6Speaker Layout Diagram -16 3 Close the terminal.

Right surround

 

 

 

Left surround

speaker (RS)

 

 

speaker (LS)

 

 

 

 

 

Left front speaker

(L)

Right front

speaker

(R)

Powered

subwoofer

(SW)

CAUTIONS:

Use speakers with the SPEAKER IMPEDANCE indicated by the speaker terminals (6 – 16 ).

DO NOT connect more than one speaker to one speaker terminal.

Connecting the speakers

Turn off all components before making connections.

*When using a single speaker for the surround back speaker

You can enjoy the surround sound by one surround back speaker. When using one surround back speaker,

set “SB OUT” to “<1SPK>” (see page 17) and

connect the surround back speaker to the left surround back speaker terminal. (No sound comes from the speaker if you connect it to the right surround back speaker terminal.)

1

2

1

3

 

 

2

 

+

+

1Twist and remove the insulation at the end of each speaker cord.

2Open the terminal (1), then insert the speaker cord (2).

For each speaker, connect the (+) and (–) terminals on the rear panel to the (+) and (–) terminals marked on the speakers.

3 Close the terminal.

Connecting the powered subwoofer

By connecting a subwoofer, you can enhance the bass or

reproduce the original LFE signals recorded in digital software.

Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cord with RCA pin plugs (not supplied).

• Refer also to the manual supplied with your subwoofer.

After connecting all the speakers and/or a subwoofer, set the speaker setting information properly to obtain the best possible surround effect. For details, see pages 15 to 19.

NOTE

You can place a subwoofer wherever you like since bass sound is non-directional. Normally place it in front of you.

6

Page 8
Image 8
JVC RX-D201S manual Connecting the speakers, Speaker Layout Diagram, Connecting the powered subwoofer, Close the terminal