JVC RX-D201S, RX-D202B Operating other manufacturers’ products, 4Release STANDBY/ON TV/DBS/CATV

Operating other manufacturers’ products

By changing the transmittable signals, you can use the supplied remote control to operate other manufacturers’ products.

•Refer also to the manuals supplied with the other products.

•To operate those components with the remote control, first you need to set the manufacturers’ codes each for the TV, VCR, CATV converter, DBS tuner, and DVD player.

•After replacing batteries of the remote control, set the manufacturers’ codes again.

❏Changing the transmittable signals for operating a TV

1Press and hold STANDBY/ON TV/DBS/ CATV.

2Press TV.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for TV” on the right.

4Release STANDBY/ON TV/DBS/CATV.

Now, you can perform the following operations on the TV.

TV VOLUME +/–:Adjust the volume on the TV.

TV/VIDEO:Change the input mode (either TV or VIDEO).

After pressing TV, you can perform the following operations on the TV.

STANDBY/ON	Turn on or off the TV.
TV/DBS/CATV:

CHANNEL +/–:Change the channel numbers.

1 – 9, 0, 100+ (+10): Select the channel numbers.

See the instructions supplied with the TV for details.

5After pressing TV, try to operate your TV by

pressing STANDBY/ON TV/DBS/CATV.

When your TV turns on or off, you have entered the correct

code.

If more than one code is listed for your brand of TV, try each

one until the correct one is entered.

Manufacturers’ codes for TV

Manufacturer	Codes
JVC	01
Hitachi	10
Magnavox	02
Mitsubishi	03
Panasonic	04,11
RCA	05
Samsung	12
Sanyo	13
Sharp	06
Sony	07
Toshiba	08
Zenith	09

Initial setting: 01

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

36