30

Adjusting the panorama control for Pro Logic IIx

Music and Pro Logic II Music—PANORAMA

This setting is available when Pro Logic IIx Music or Pro Logic II
Music is activated for the analog or digital 2-channel sound signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see page 37.
•Once you have made an adjustment, it is memorized until you
change the setting.
•You cannot adjust this item directly from the remote control.
PANORAMA <ON>Select to add “wraparound” sound effect
with side-wall image.
PANORAMA <OFF>Select to listen to originally recorded
sound.
Initial setting: PANORAMA <OFF>

Adjusting the center channel localization for Pro

Logic IIx Music and Pro Logic II Music—CENTER

WIDTH

This setting is available when Pro Logic IIx Music or Pro Logic II
Music is activated for the analog or digital 2-channel sound signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see page 37.
• If “CENTER SPK” is set to “NO” (see page 22), this item is not
adjustable.
•Once you have made an adjustment, it is memorized until you
change the setting.
•You cannot adjust this item directly from the remote control.
Adjustable range: OFF and 1 to 7 (in 1 step intervals)
Initial setting: C WIDTH <3>
As the number increases, the center channel sound moves
toward the left and right speakers.
Normally, select “3.”

Adjusting the sound localization position for Pro

Logic IIx Music and Pro Logic II Music

—DIMENSION

This setting is available when Pro Logic IIx Music or Pro Logic II
Music is activated for the analog or digital 2-channel sound signal.
To activate Pro Logic IIx Music or Pro Logic II Music, see page 37.
•Once you have made an adjustment, it is memorized until you
change the setting.
•You cannot adjust this item directly from the remote control.
Adjustable range: 1 to 7 (in 1 step intervals)
Initial setting: DIMENSION <4>
As the number increases, the sound localization moves towards
forward from backward.
Normally, select “4.”

Adjusting the sound localization of the center

channel—CENTER GAIN

This setting is available only when Neo:6 Music is in use.
• If “CENTER SPK” is set to “NO” (see page 22), this item is not
adjustable.
•Once you have made an adjustment, it is memorized until you
change the setting.
•You cannot adjust this item directly from the remote control.
Adjustable range: 0 to 1.0 (in 0.1 step intervals)
Initial setting: C GAIN <0.3>
As the number increases, the center channel will be localized
clearly.
Normally, select “0.3.”

Adjusting the center tone—CENTER TONE

This setting is available when one of the Surround/DSP modes is
in use. To activate Surround/DSP mode, see page 37.
• If “CENTER SPK” is set to “NO” (see page 22), this item is not
adjustable.
•This setting is common to all Surround modes, and is
memorized separately for DSP modes.
Adjustable range: 1 to 5 (in 1 step intervals)
Initial setting: C TONE <3>
As the number increases, the dialogue becomes stronger.
Normally, select “3.”
•When the center tone is set to other than “C TONE <3>,” the
C.TONE indicator lights up on the display.
From the remote control:
Press C. TONE repeatedly to select the level you want to
adjust.

Aligning the vertical localization of the center

channel for Surround/DSP modes—CENTER ALIGN

This setting is available when one of the Surround/DSP modes
(except PLIIx Music, PLII Music, NEO:6 Music, and ALL CH
STEREO) is in use. To activate Surround/DSP mode, see page
37.
• If “CENTER SPK” is set to “NO” (see page 22), this item is not
adjustable.
•Once you have made an adjustment, it is memorized for each
Surround/DSP mode.
•You cannot adjust this item directly from the remote control.
C ALIGN <ON>Select this when you cannot feel as if the
actors or singers are speaking or singing on
the screen.
C ALIGN <OFF>Center alignment is turned off.
Initial setting: C ALIGN <OFF>
123
456
789
10
0
10
27-30RX-D401S[J]_f.p65 05.7.1, 7:08 PM30