JVC RX-D402B, RX-D401S Activating the Surround/DSP modes

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step

again.

Select and play any source.

•Surround/DSP modes are not available when multi channel

PCM (see page 34) signals recorded in DVD-Audio are

coming. See page 11 for details.

•Make sure you have selected the audio input mode (analog

or digital) correctly (see pages 16 and 17).

Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

Turn MULTI JOG to select the Surround/DSP

mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

*1“AUTO SURROUND” is the initial setting.

*2Available Surround modes vary depending on the speaker

settings and the incoming signals. For details, see page

36.

*3 If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO”

is not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the

display.

When you select “AUTO SURROUND”

You can enjoy the Surround mode easily.

•For details about the Surround modes, see page 36.

•When “AUTO SURROUND” is activated, the AUTO SURR indicator

lights up on the display.

How does “AUTO SURROUND” work?

•If a multi-channel signal comes in, an appropriate Surround

mode will be selected automatically.

• If a Dolby Digital 2-channel signal with surround signal comes

in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.

•If a Dolby Digital 2-channel signal without surround signal

comes in, “SURROUND OFF (stereo)” will be selected.

•If a Linear PCM signal comes in, “SURROUND OFF (stereo)”

will be selected.

NOTE

“AUTO SURROUND” does not take effect in the following cases:

–While playing an analog source,

–While selecting one of the fixed digital decode mode—“DOLBY

DIGITAL” or “DTS” (see page 18).

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker

settings and the incoming signals. For details, see page 36.

Activating one of the Surround/DSP modes automatically

recalls the memorized settings and adjustments.

•To adjust the speaker output level, see page 28.

•When activating one of the Surround/DSP modes, you

can adjust CENTER TONE (see page 30).

•When activating one of the Surround/DSP modes

(except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and

ALL CH STEREO), you can adjust CENTER ALIGN (see

page 30).

•When activating “NEO:6 MUSIC”, you can adjust CENTER

GAIN (see page 30).

•When activating the DSP mode (except All Channel

Stereo mode), you can adjust the following settings:

EFFECT (see page 29)

LIVENESS (see page 29)

ROOM SIZE (see page 29)

• When activating “PLIIx MUSIC” and “PLII MUSIC”, you

can adjust the following settings:

CENTER WIDTH (see page 30)

DIMENSION (see page 30)

PANORAMA (see page 30)

Selecting the Surround/DSP modes

From the remote control:

Select and play any source.

•Surround/DSP modes are not available when multi channel

PCM (see page 34) signals recorded in DVD-Audio are

coming. See page 11 for details.

•Make sure you have selected the audio input mode (analog

or digital) correctly (see pages 16 and 17).

Press SURROUND repeatedly to select the

Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

*1“AUTO SURROUND” is the initial setting.

*2Available Surround modes vary depending on the speaker

settings and the incoming signals. For details, see page

36.

*3 If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO”

is not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF”

appears on the display.

LS RS

S.WFR LFE

DIGITAL

DIGITAL AUTO

SURROUND OFF (Back to the beginning)

Surround modes*

AUTO SURROUND*

HALL1 HALL2 LIVE CLUB DANCE CLUB

PAVILION THEATER1 THEATER2

MONO FILM*

ALL CH STEREO*