JVC RX-D402B, RX-D401S AV COMPU LINK remote control system

COMPU LINK EX

COMPU LINK-III

COMPU LINK

COMPU LINK-

III

AV COMPU LINK

remote control

system

The AV COMPU LINK remote control system allows you to

operate JVC’s video components (TV, DVD player*, and VCR)

through this receiver.

This receiver is equipped with the AV COMPU LINK-III, which has

added a function to operate JVC’s video components through the

component video jacks. To use this remote control system, you

need to connect the video components you want to operate,

following the diagrams below and the procedures on page 37.

•Refer also to the manuals supplied with your video components.

*“DVD player” on pages 38 and 39 can be replaced with “DVD

recorder.”

Connections 1: AV COMPU LINK connection

NOTES

•When connecting the receiver and a TV with the AV COMPU LINK

EX terminal by using a component video cable, you cannot use

Automatic selection of TV’s input mode (see page 39).

•When connecting only the VCR and DVD player to this receiver,

connect it directly to the receiver using cable with the monaural

mini-plugs.

•You can connect only the TV with AV COMPU LINK EX or AV

COMPU LINK-III terminal to the AV COMPU LINK-III terminal.

Connections 2: Video cable connection

This receiver is equipped with three types of the video terminals

other than the HDMI terminals—composite video, S-video, and

component video, and the signals coming into this receiver

through one type of video terminals can output only through the

terminal of the same type. So you need to connect the video

components to this receiver using one of the following three ways.

•When using the AV COMPU LINK remote control system, set

the video output and video input setting for the DVD player and

the VCR correctly (see “Selecting the video input setting” on

page 16 and “Selecting the output video signals—VIDEO

OUTPUT” on page 26); otherwise, the correct input for this

receiver will not be selected on the TV.

To video input 1

S-video cable S-video cable

VCR

DVD player

TV

Monaural mini-plugs

(not supplied)

Case 1:

When connecting the source equipment to the receiver

through the S-video terminals, connect this receiver to the

TV’s video input 1 terminal using S-video cables.

Monaural

mini-plugs

(not supplied)

IMPORTANT:

•The AV COMPU LINK remote control system cannot control the

DBS tuner connected to the DBS IN jacks.

•When “VIDEO OUTPUT” is set to “VIDEO <HDMI>” (see page

26), the AV COMPU LINK remote control system may not

operate properly. In this case, do not make the AV COMPU

LINK connection.

Case 2:

When connecting the source equipment to the receiver

through the composite video jacks, connect this receiver

to the TV’s video input 2 terminal (composite video input)

using composite video cables.

Case 3:

When connecting the source equipment to the receiver

through the component video jacks, connect this receiver

to the TV’s video input 2 terminals (component video

input) using component video cables.

To video input 2

(Composite)

Composite video cable Composite video cable

To video input 2

(Component)

Component video cable Component video cable

Source

equipment

Source

equipment

RX-D401S

RX-D402B

Source

equipment

RX-D401S

RX-D402B

RX-D401S

RX-D402B

38-39RX-D401S[J]_f.p65 05.7.1, 7:09 PM38