COMPU LINK Remote Control System

The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the receiver.

To use this remote control system, you need to connect JVC audio components through the COMPU LINK (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see page 10).

Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are complete.

Automatic Source Selection

When you press the play (3) button on a connected component or on its own remote control, the receiver automatically turns on and changes the source to the component. On the other hand, if you select a new source on the receiver or on the remote control, the selected component begins playing immediately.

In both cases, the previously selected source continues playing without sound for a few seconds.

CD player

CD recorder

Cassette deck

or

MD recorder

RX-DP9VBK

Turntable

COMPU LINK – 4

(SYNCHRO)

Note:

If the source changes from an analog source, for which Line Direct (see page 21) is activated, to a digital source, muting time* will be a little longer.

*The period during which the receiver changes the source mechanically. No sound comes out during this period.

Automatic Power On/Off (Standby): only possible with the COMPU LINK-3 and COMPU LINK-4 connection

The connected components turn on and off (standby) along with the receiver.

When you turn on the receiver, one of the connected components will turn on automatically, depending on which component has been previously selected.

When you turn off the receiver, the connected components will turn off (standby).

Synchronized Recording

Synchronized recording means the cassette deck (or MD recorder) starts recording as soon as a CD begins playing.

To use synchronized recording, follow these steps:

Notes:

There are four versions of COMPU LINK remote control system. This receiver is equipped with the fourth version — COMPU LINK- 4. This version is added systematic operations with the CD recorder to the previous version — COMPU LINK-3.

If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components. (For example, the turntable or CD player in the diagram above.)

To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 22.)

Refer also to the manuals supplied with your audio components.

1.Put a tape in the cassette deck (or an MD in the MD recorder), and a disc in the CD player.

2.Press the record (ƒ) button and the pause (8) button on the cassette deck (or MD recorder) at

the same time.

This puts the cassette deck (or MD recorder) into recording pause.

If you do not press the record (ƒ) button and pause (8) button at the same time, the synchronized recording feature will not operate.

3. Press the play (3) button on the CD player.

This remote control system allows you to use four functions listed below.

Remote Control through the Remote Sensor on the Receiver

You can control the connected audio components through the remote sensor on the receiver using this remote control. Aim the remote control directly at the remote sensor on the receiver. For details, see pages 55 and 56.

The source changes on the receiver, and as soon as play starts, the cassette deck (or MD recorder) starts recording. When the play ends, the cassette deck (or MD recorder) enters recording pause, and stops about 4 seconds later.

Notes:

During synchronized recording, the selected source cannot be changed.

If the power of any component is shut off during synchronized recording, the COMPU LINK remote control system may not operate properly. In this case, you must start again from the beginning.

47

Page 50
Image 50
JVC RX-DP9VBK manual Compu Link Remote Control System, Same time, Press the play 3 button on the CD player

RX-DP9VBK specifications

The JVC RX-DP9VBK is an advanced audio receiver that combines versatility, high-quality sound, and an array of features aimed at enhancing your home entertainment experience. This model aligns itself with both audio enthusiasts and casual listeners, providing a robust platform for a range of audio sources.

One of the standout features of the RX-DP9VBK is its powerful amplification capabilities. It delivers an impressive output, allowing it to drive various types of speakers with ease, making it suitable for larger rooms or home theaters. The unit provides support for multiple speaker configurations, ensuring that users can tailor their sound environment according to their space and preferences.

The RX-DP9VBK boasts built-in Bluetooth technology, allowing for seamless streaming from smartphones, tablets, and other compatible devices. This feature enhances convenience, enabling users to enjoy their favorite music, podcasts, and audiobooks without the need for complex wiring. The receiver also supports a range of audio formats, ensuring compatibility with various digital sources.

Equipped with a high-quality FM/AM tuner, this receiver offers excellent radio reception, giving users access to their favorite stations. The automated preset feature simplifies the process of saving and retrieving channels, making it user-friendly. Additionally, the receiver provides multiple input options, including HDMI, optical, and analog outputs. This variety allows users to connect a wide array of devices, such as Blu-ray players, gaming consoles, and streaming boxes.

Another notable characteristic of the RX-DP9VBK is its user interface, designed for ease of navigation. The remote control provides quick access to essential settings, while the on-screen display ensures users can make adjustments effortlessly.

For enhanced sound control, the RX-DP9VBK incorporates several audio processing technologies, including equalization and surround sound modes. These features allow users to optimize audio output according to their listening preferences, whether enjoying music, watching movies, or playing video games.

In conclusion, the JVC RX-DP9VBK is an exceptional audio receiver that stands out for its combination of power, versatility, and user-friendly features. With its advanced connectivity options, superior sound quality, and a wide range of supported formats, it is an excellent choice for anyone looking to enhance their audio experience at home. Whether you’re a casual listener or an audiophile, the RX-DP9VBK caters to diverse needs, making it a noteworthy addition to any home entertainment setup.